meetch

On 25/03/2023 at 10:03, Shimrod said:

Have you flashed the firmware of the mount at all? If so check which version you have installed. I don't mean the version number (e.g. 3.40), but whether you have flashed the standard or AZ/EQ version. If using the latter, you have the telescope on the right hand side of the mount (when looked at from behind the mount) even if using it in AZ mode. If you have the standard version of the firmware, the telescope should be on the left.

Skywatcher firmware download page

These are the descriptions of the firmware from the above link.

Standard firmware (telescope to left)

 

AZ/EQ firmware (telescope to right, or for using a wedge in EQ mode)

 

 

 

Thank you, thank you, thank you, Shimrod!  this is what i've been overlooking! after pulling all of my hair out (and some of the cat's), it was as simple as putting the scope on the RH side! Thanks again!!