Hello guys, since our last message, yesterday finally I had a clear sky, so I could test out the equipment again, the error is not happening anymore, So, the EQMod worked well, however I didn't find the driver specific for my EQ5 mount, then I used the HEQ5/EQ6, and it worked well until I start doing the guiding and the alignment via Plate solving.
So I brought my equipment to my back yard and started setting up everything. As I said I don't have visual to Polaris, so I tried to make the alignment via 3 start Plate Solving on N.I.N.A. It started going well, but something really weird happens after while, the plate solving just start asking to go up and up on Altitude axis which is very weird since I believe the altitude should not change after being set, am I right? and I noticed the azimuth also started to increase, what I think that happens is the mount stops the sideral tracking or something. Should it be because of the drivers I have? It begins well and then out of sudden starting increasing the azimuth and altitude.
Secondly I also tried the auto-guiding but it didn't work, it says communication error, which leads me another question then I have a question how to set up the cables? I'm connecting the Hand control via USB to my pc, there is a cable on the Synscan Control directly to my Synscan Hand Control, The guiding from my camera is connecting to the SynScan control(not hand control) via ST4 which I believe it is the right way, isn't it? The guide camera connects to my pc via USB. Or should I not connect the guide camera to the hand control since my pc is controlling the mounting? My hand control is set to PC direct connection, othewise it doesn't work to connect via EQMod.
Is there anything else you may know I might need to do?