acme Posted April 9, 2011 Share Posted April 9, 2011 This is my first attempt at M3. Guided by my new QHY5, makes such a difference after struggling with my SPC900 as a guide cam.Cannon 1000d and a SW 150P DS ..6x3 minutes stacked in DSS no dark frames just a little tweak in PS CS3. Dust bunnies and noisy. I have not had the time to learn processing so any advice would be most welcome.Acme Link to comment Share on other sites More sharing options...
Sparrow Posted April 9, 2011 Share Posted April 9, 2011 That's a promising image - take some flats to get rid of the dust bunny and I think you've got a pretty good image there. Nice sharp detail of the cluster Link to comment Share on other sites More sharing options...
acme Posted April 9, 2011 Author Share Posted April 9, 2011 Thanks sparrow,I did take some dark frames but DSS rejected them, it was the first time I had used DSS and I thought hey ho at least I managed to stack 6 images. I need to read up on processing but at least I have made start.Acme Link to comment Share on other sites More sharing options...
acme Posted April 10, 2011 Author Share Posted April 10, 2011 I managed to get the darks into DSS and this is the results, Would I get much improvement if I added some flats to the stack. I have not moved the camera since I took the images or changed the focus so could I go shoot some light frames now?Acme Link to comment Share on other sites More sharing options...
Sparrow Posted April 10, 2011 Share Posted April 10, 2011 Yes flats would get help to get rid of uneven illumination and the dust bunny. This would make it much easier to process.RegardsJohn Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.