ZS66 reducer chip distance?

[ollypenrice]

A quickie; does anyone know the proper chip distance for the dedicated WO 0.8x reducer made for the ZS66? I have one but have lost this info.

Thanks,

Olly

[Psychobilly]

55-56mm maybe...?

That would be the spacing for connecting a DSLR directly to the reducer using a T Ring ...

[Ben Ritchie]

I'd agree, the one I had was a direct fit to a 300D+T-ring

[ollypenrice]

Thanks both, it's a good starting point. I reckon it'll be that. I'm a bit too close at the moment. My hope is to make a double barrelled device using the reduced Baby Q with the OSC and the ZS66 for Ha on the same targets when going for large mosaics. Speed machine!

Olly

[blinky]

Yep, it's 55mm

[ollypenrice]

Cheers Blinky.

Olly

[Steve 1962]

Hi Olly

Just found this on the WO website - it's 56mm

Regards

Steve

FW0.8X_T-RING_950425.pdf

[Steve 1962]

....and according to Canon; the flange to chip distance of an Canon EFS camera is 44mm.

My T Adapter is 10mm thick ..so 44 + 10 = 54mm. (the WO RFiii link on the WO website states 56mm)

Anyone know where I can source a 2mm spacer please?

Cheers

Steve