Phd 2

[francis8]

Hi, my guiding zwo camera was stoping every few minutes, I searched for any solutions and the most frecuente answer , because my imaging camera is a zwo as well, was to change the driver to a ascot zwo driver for the guide camera on phd 2, it solve the problem straight away but the total error, the one between brackets, is not showing, any one have any ideas why this  happened,

thanks

[francis8]

Ascom not ascot, sorry fat fingers 

[scotty38]

Doesn't that populate when you start guiding?

[francis8]

Yes it always does, and it was till I change the zwo driver to the Scot driver

[francis8]

Ascom zwo driver

[alacant]

Make sure that both focal length and pixel size are entered in settings. 

If you've changed the camera driver, probably better to make a new profile. Just make sure the mount and camera are connected before you do so.

Cheers 

 

[francis8]

20 minutes ago, alacant said:

Make sure that both focal length and pixel size are entered in settings. 

If you've changed the camera driver, probably better to make a new profile. Just make sure the mount and camera are connected before you do so.

Cheers 

 

That make sense, I didn’t check that, thanks for the reply