3D Printed ZWO T2 to C-Mount adapter.

[kbrown]

This has been probably done before a million times but here's my take on T2 to C-Mount adapter that fits directly on many ZWO cameras. I've tested this on my ASI 183MC Pro and it works perfectly with the 25mm and 50mm C-mount lenses I have. I tried to make a CS mount adapter too but it seems like a mission impossible as the back of the lens would crash into the sensor window due to the 5mm shorter back focus length.

STL attached.

ZWO_T2_to_CS_adapter_v003.stl.zip