Celestron EdgeHD mount with Starsense Camera

[StevieDvd]

Hi,

I am checking out a setup that I have not used much since it was bought and updating firmware and making sure all is in perfect working order.

Not had the pleasure of updating Celestron gear before but located the CFM (Celestron Firmware Manager) and have invoked the update process. After the updated packages were downloaded and the detected devices were updated it reports  as below:

Does the above look like a correct set of devices?

The mount & camera are showing the latest version but I can't find the Handset version number on the Celestron site.

Good news it all seems to startup and get to the alignment prompt but have to do a setup outside to fully test.

Or am I worrying needlessly and all is good?

Thanks

Steve

[Shimrod]

43 minutes ago, StevieDvd said:

 

The mount & camera are showing the latest version but I can't find the Handset version number on the Celestron site.

Good news it all seems to startup and get to the alignment prompt but have to do a setup outside to fully test.

Or am I worrying needlessly and all is good?

Thanks

Steve

Last time I checked, the firmware versions on the celestron website were out of date, so don't be surprised if your firmware erosion is not listed 

I've never had a problem using CFM for updates so I don't think you have anything to worry about.

[StevieDvd]

21 minutes ago, Shimrod said:

Last time I checked, the firmware versions on the celestron website were out of date, so don't be surprised if your firmware erosion is not listed 

I've never had a problem using CFM for updates so I don't think you have anything to worry about.

Thanks, I'll soon see if it all works outside. 🤞