Mannfried Posted May 29, 2022 Share Posted May 29, 2022 I have a celestron nexstar se8 with the stock base I have operated using batteries and suddenly it no longer will turn on. Any suggestions about what may have happened and what the repair might entail? Link to comment Share on other sites More sharing options...
Cornelius Varley Posted May 30, 2022 Share Posted May 30, 2022 Unless it is something simple such as a broken wire or corroded terminal stopping power reaching the electronics it will difficult to determine the cause. Link to comment Share on other sites More sharing options...
Cosmic Geoff Posted May 30, 2022 Share Posted May 30, 2022 You could try obtaining a suitable external regulated +12v power supply with centre positive and plug it in and see what happens. Few people continue to use these mounts with internal batteries. One possibility is that the handset has developed a bad connection where it plugs in so you can't see it light up. Link to comment Share on other sites More sharing options...
bosun21 Posted May 30, 2022 Share Posted May 30, 2022 You should try plugging in a 12v DC power supply (centre pin positive). If it still doesn’t work then it could be a myriad of things causing the failure. This will require a more thorough investigation. If it does work then it’s either the contacts in the battery compartment have lost tension, or have become oxidized. Retention the contacts and check the wires are connected ok. Good luck 👍 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now