trying to solve the madness of the Japanese: FS60CB and Binoviewer

[Fedele]

FS60CB  & Maxbright 2
test and option 1 not completaly success due to the stupid things did on the focuser by Takahashi (sorry...)

Using the TV Ploss 25 mm with a 1,25  GPC (the lowest) i don t reach focus for mm. No focus instead with   shortest with shorter eyepieces. 
The problem is that the inside of the aluminum tube of the focuser is less than 2 ", so the 2" nose does not enter completely and stops 12 mm inside the PLL eyepiece prota.
Now i  will try a second option, to reach focus with the original focuser: 

or I will use two 13.5 mm m48 / t2 fittings or much more likely I will sacrifice a 2 "nose by sawing it and reducing it to 10/12 mm
I will do the same with a 2 "GSO extension, allowing me to eliminate the crazy set of three AVVITA & Unscrew fittings ... a real madness that wastes a lot of time interchanging accessories.