Guide camera recommendations for my set up

[Stuart1971]

6 hours ago, vlaiv said:

Still the same. It only impacts min mo parameters in sense that it changes its value as value is pixel related and not in arc second.

0.1 of 8.6um pixel is 0.86 microns and that would be something like 0.25 of 3.75um pixel size.

I asked the guy who wrote EQMOD about why it was recommended not to change the Min Pulse setting and this was his reply…

”You can reduce the min pulse guide width down to 20mS but the problem is it is that this then getting down to a level where any errors in software timing or comms turnaround delays become significant. So you may be able to get shorter pulses but they may not be consistently accurate all of the time.

If you're currently at 0.5x you still have some scope to reduce the guiding rate and I would probably go that route first myself’