My DIY Autofocuser Update

[dazzystar]

Hi All,

I thought I'd share some finished pics of my DIY Autofocuser. This was based on Robert Brown's excellent MyFocuserPro2 project 

I cut down the original schematic as I had no use for buttons, LEDs, handset, joystick, temperature probe, etc. and just wanted to stick to the essentials. I 3D printed the motor enclosure (a NEMA 17 PG5), electronics box enclosure and bracket for my Startravel 102 scope. I have tested and all is good but I haven't yet taken it for a 'proper' spin yet as I'm still completing my setup. Here are some pics.

Cheers
Daz

 

 

 

[dazzystar]

Thanks @runoffshed for the love!

[dazzystar]

On 06/02/2022 at 18:15, dazzystar said:

Thanks @runoffshed for the love!

and @fozzybear!