DIY Vixen Dovetail adaptor for Samyang/Rokinon 135MM F2 lens (3d print)

[chemistorge]

Hi, 

I spend along time looking for a way to mount by new 135 mm lens to my mount with my ASI294 attached, I could only find a commercial 3d printed one. So I used Fusion 360 to make my own. I have included the STL files on thingyverse (https://www.thingiverse.com/thing:5205883) (Not up for 24 hours as I am a new user). I printed in PLA on ender 3 v2, 208 deg nozzle, bed at 65 deg, 0.2 mm layer height and 20 % infill. 

I used M4 bolts to attach rings to dovetail and M6 nylon bolts to secure lens into the rings (Note: don't over tighten nylon bolt in ring near front of lens as it stops the focuser turning).

hope it is useful to someone!

large sma135 ring_with M6 thread v2.stlSmall sma135 ring_with M6 thread v2.stlsamyang dovetail v1.stl

Edited January 18, 2022 by chemistorge