Power supply ok for heq5 mount?

[Astroblagger]

Is this power supply ok to power a heq5 mount from the mains.? It's an old monitor supply I can change the connection at the end to suit the mount. 

[teoria_del_big_bang]

It says it is 12V DC at 5A, so more than likely will be okay, but not sure how smooth the output actually is or how smooth it needs to be for a mount, so I would not like to say 100% for sure hand on heart it will definitely be okay.

If you swap the end just make sure the polarity is correct.

Steve

[wookie1965]

I use a cctv tip positive supply for my EQ5 but I have a 10amp one to run dew strips as well. 

[Stefek]

Power and voltage rating looks OK, it should be OK. I had one of those generic (or should I call them cheap)  ones for HEQ5. It fact HEQ5 does not need 5A, even 3 is more than enough for the mount itself. Those PSs come with different connectors (inner pin diameter of either 2.1 or 2.5 mm) , so be sure that it fits properly to the mount.