is the thread on a back of a c8 edge 0.7x reducer same on back as the back of the c8 edge

[iwols]

as the title says ,at the minute i have a clicklok on the back of my c8 if i put a reducer on will the clicklok go straight on the back of my reducer if that makes sense thanks guys

[Stargazer McCabe]

Yes. That's what I do...

[iwols]

6 minutes ago, Stargazer McCabe said:

Yes. That's what I do...

thanks👍

[Space Hopper]

Be careful not to over tighten things as i've heard they can be problematic (the reducer) to remove.

Maybe put a spot of lubricant on the threads.....?

[iwols]

6 hours ago, Stargazer McCabe said:

Yes. That's what I do...

thanks ,so are you using the clicklok?

[Stargazer McCabe]

On 30/11/2021 at 20:05, iwols said:

thanks ,so are you using the clicklok?

Yup...

[Shimrod]

On 30/11/2021 at 14:50, Space Hopper said:

Be careful not to over tighten things as i've heard they can be problematic (the reducer) to remove.

Maybe put a spot of lubricant on the threads.....?

My reducer fell to bits when I unscrewed it from the back of my Edge - the retaining ring on the inside of the reducer came undone as I removed it from the scope. Fortunately the lens elements fell out into the palm of my hand and I was able to re-assemble but it would have been a nightmare had they fallen to the floor.