Cable tidying up

[bottletopburly]

 So im trying thinking of tidying the cables on my setup Can anyone tell me if i can plug my qhy 290mm guide camera , and my deepskydad autofocus unit into a zwo533mc utilising the two spare USB ports  on the camera or I could plug guide cam into pi4 , am I likely to encounter any compatibility issues , then I could run the Zwo533mc to a raspberry pi4 running APT server ,

the shed pc can connect wirelessly to the pi4 , power to peripherals can be powered from my deepskydad hub2 so this setup could possibly tidy cabling up   Anyone see any issues with this , memory stick in pi4 usb3 port , Eqdirect cable to usb2 port on pi4 .

 

dave 

[Laurin Dave]

I run a SX Ultrastar and DeepSkyDad autofocuser through the hub on my ASI2600mc with no issues... from there to the desktop pc though an active USB3

HTH 

Dave

[bottletopburly]

1 minute ago, Laurin Dave said:

I run a SX Ultrastar and DeepSkyDad autofocuser through the hub on my ASI2600mc with no issues... from there to the desktop pc though an active USB3

HTH 

Dave

Thanks Dave