Whats the best configuration for me?

[icebergahed]

I need a bit of advice if imaging with 2 setups with different fov, one osc and the other mono. Which should get the wider fov? So this is what i get in stellarium. I have a 0.6 and 0.8 FR, and depending on which train has the 0.6 means that ota gets the larger FOV. On pixel suitability the 60mm seem ideal with both FR's but the 102mm at 0.8FR not so much.

[vlaiv]

Which camera is color and which one is mono?

Scopes are both F/7, one is 60mm and other is 100mm, right? Focal reducers are x0.8 and x0.6?

Interesting fact is - FOVs are best matched if you have x0.8 on both scopes or x0.6 on both scopes.

Pixel suitability calculations you can just ignore and use 2"/px with these scopes and not less than that. You'll probably have to bin in software.

I would be inclined to match 100mm scope with ASI183 and x0.8 if ASI183 is mono camera and 60mm with 178 (presumably osc in that case).

 

[icebergahed]

38 minutes ago, vlaiv said:

Which camera is color and which one is mono?

Scopes are both F/7, one is 60mm and other is 100mm, right? Focal reducers are x0.8 and x0.6?

Interesting fact is - FOVs are best matched if you have x0.8 on both scopes or x0.6 on both scopes.

Pixel suitability calculations you can just ignore and use 2"/px with these scopes and not less than that. You'll probably have to bin in software.

I would be inclined to match 100mm scope with ASI183 and x0.8 if ASI183 is mono camera and 60mm with 178 (presumably osc in that case).

 

Hi yes so the 183 is osc and the 178 is the mono

Thanks