Recently Browsing 0 members
No registered users viewing this page.
Hi everyone, not sure if this is the correct forum for this thread but thought it was close enough to topic 🙂
In prep for my Pulsar Obsy build a couple of months from now I’m looking to get ahead of software requirements for the dome. Can anybody provide advice on a decent ‘Skinny’ software stack for mount and dome control. Observing has been simple for me thus far, only need to worry about mount control. However, I got to thinking about how clumsy and inefficient things would be if goto commands were two separate unrelated actions one for mount control from my chosen planetarium software SkySafari, and then having to reach over and key in the Azimuth setting for dome position. As far as I know there is no dome control interface from SkySafari, so it looks like this will be achieved via an RDP session into my Intel NUC and thence to the dome controller. No big deal I guess this will just join my Atik Horizon control Software. What is my best solution for joint mount and dome control?
As i am soon to be the proud owner of a Vixen Polarie star tracker i am looking for some advice from the experts here on SGL with regards to widefield imaging with the Vixen Polarie.
I will initially be using it with a modified Canon 600D so am looking for advice on which lens would be best suited to use with it, I have already been pointed in the direction of the Samyang 135mm which by all accounts is a pretty good contender, so aside from that particular lens what other/s would you recommend that are Canon fitting,
Thanks in advance 🙂
just wondering what options are available for me to upgrade the standard SXW Vixen clamp to enable it to accept Losmandy style dovetails. I recently acquired a CGE dovetail that I would like to use with my 8” Edge.
Wondering what a realistic load capy. is for a Vixen APZ. My biggest scope is an ST120 refractor that weighs about 5.5 kg with 8x50 finder and eyepiece. I'm thinking of upgrading to a Crayford focuser which I believe will add another half kilo or so.
I currently have a Twilight 1 which seems maxed out with the 120 and a SkyWatcher AZ5 which handles it a bit better, but it's also close to max load, I think.
I have a Manfrotto 475B and a stock TW1 tripod. I'd prefer not to use a counterweight, but if it's a necessity, so be it.
Just got an asiair pro and am setting things up. Have updated to the latest firmware.
The aap and my ss2k seem to connect OK. However when I issue a goto command to the ss2k, nothing actually happens at the mount.
However the 4 directional arrows on the aap ui work fine and do indeed make the mount move.
Any clues please?