Jump to content

sgl_imaging_challenge_banner_31.thumb.jpg.b7a41d6a0fa4e315f57ea3e240acf140.jpg

Recommended Posts

Hi,

I have Skytee 2 mount, on which I use the side mount for my 200p and use the top mount for my 127 Mak, sometimes at the same time. (Yes, I got carried away with secondhand bargain madness during the first lockdown 😏)

What I would like to do is use the top mount to mount my 15x70 binoculars so I can let the family see what I'm looking at without having change the height of eyepieces on the scope or them using steps.

For this I would need a sturdy adaptor which has a dovetail (vixen?) base with the normal screw fit for the tripod mounting bracket between the lenses.

Does such a thing exist? If it does, I haven't been able to find it.

Does anyone know of one?

Thanks

 

Link to post
Share on other sites

The easiest way is probably to use a dovetail plate with a 1/4" mounting screw (eg the Orion 7388) directly onto the mounting bracket of your binocular. If you can't visualise what I mean, say so (safest to DM to make sure I get it) and I'll rig it and post an image here.

HTH

  • Like 1
Link to post
Share on other sites
2 hours ago, BinocularSky said:

The easiest way is probably to use a dovetail plate with a 1/4" mounting screw (eg the Orion 7388) directly onto the mounting bracket of your binocular. If you can't visualise what I mean, say so (safest to DM to make sure I get it) and I'll rig it and post an image here.

HTH

Thanks for the reply, I know what you mean, I was thinking of that as a work around, I just wondered if anyone made a bespoke item but I guess not that many people have a horizontal mount.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By chrobakx
      This is Celestron cg3 mount suitable for any telescope tube with vixen dovetail.
      Load capacity is approximately up to 4 kg
      Condition is used, but in very good shape. 
      It's comcompletely with 3d printed levelling plate, under tray for accessories, slow motion and locking knobs.
      Mount was completely stripped down, removed factory sticky grease and applied proper grease where applicable.
      Price: £90
      I can post it by Hermes or DPD if you are happy to pay for postage.
      I'll accept PayPal as family/friends or commercial if you'll pay the 3% fee.






    • By DeepSkyMan
      Hi everyone, not sure if this is the correct forum for this thread but thought it was close enough to topic 🙂  
      In prep for my Pulsar Obsy build a couple of months from now I’m looking to get ahead of software requirements for the dome.  Can anybody provide advice on a decent ‘Skinny’ software stack for mount and dome control.  Observing has been simple for me thus far, only need to worry about mount control.  However,  I got to thinking about how clumsy and inefficient things would be if goto commands were two separate unrelated actions one for mount control from my chosen planetarium software SkySafari, and then having to reach over and key in the Azimuth setting for dome position.   As far as I know there is no dome control interface from SkySafari, so it looks like this will be achieved via an RDP session into my Intel NUC and thence to the dome controller.   No big deal I guess this will just join my Atik Horizon control Software.  What is my best solution for joint mount and dome control?
      Kind Regards
      Paul.
    • By chrobakx
      I looking for a polar scope for my eq3 or HEQ5 mount
    • By JemC
      Hi all,
      As i am soon to be the proud owner of a Vixen Polarie star tracker i am looking for some advice from the experts here on SGL with regards to widefield imaging with the Vixen Polarie.
      I will initially be using it with a modified Canon 600D so am looking for advice on which lens would be best suited to use with it, I have already been pointed in the direction of the Samyang 135mm which by all accounts is a pretty good contender, so aside from that particular lens what other/s would you recommend that are Canon fitting,
      Thanks in advance 🙂
    • By DeepSkyMan
      Guys
       
      just wondering what options are available for me to upgrade the standard SXW Vixen clamp to enable it to accept Losmandy style dovetails.  I recently acquired a CGE dovetail that I would like to use with my 8” Edge.
       
      Kind Regards
      Paul
       
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.