Jump to content

stargazine_ep34_banner.thumb.jpg.28dd32d9305c7de9b6591e6bf6600b27.jpg

Dual speed moonlight focuser for C11 edge HD.


Recommended Posts

Originally brought for my C11 HD Edge, which its made for, but if used with filter wheel, OAG, and 0.7 focal reducer the spacing is to far out, hence the reluctant sale of this A+ Condition, unused (other than to see if it worked) focuser. The price includes special delivery. Bank transfer, paypal is ok, or cash/collect...ect... The price is £200. This would be great for planetary imaging, imaging without using an OAG, bringing the travel closer. Thanks for looking.

119684664_10218204958816841_3635802018337057076_o (1).jpg

119731115_10218204959856867_1569121621200764467_o (1).jpg

119735267_10218204959176850_6795171014339343883_o (1).jpg

119680945_10218204960056872_2237124176671757794_o.jpg

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Ade Turner
      Now I’ve managed to sort out control of my EQ6-R Pro using Stellarium via EQASCOM, I’m working my way through the other equipment I want to control from my Windows 7 laptop.
      I’m stuck trying to get my Celestron focuser to be recognised. This is what I’ve done so far:
      Downloaded the Celestron Focuser Utility Program (.exe file) from here: https://www.celestron.com/pages/manuals-software Also downloaded the December 2019 USB ASCOM driver set up from above. I ran the ASCOM driver set up and restarted the laptop. Connected focuser direct to laptop via USB. The focuser’s power light shows red and in Windows control panel it recognises the device as ‘Celestron Focuser’ but indicates no driver present. Ran the Celestron focuser utility program hoping it would connect and install the right driver so I could calibrate, but it can’t detect the focuser at all. Finally, ran APT to see if I could connect by choosing the ASCOM driver under ‘Gear’ but this doesn’t work either. Stuck now. I’m guessing I need to somehow ‘tell’ Windows where the driver is...? 
      Any thoughts? Thanks everyone
      🙂
       
      EDIT: I have previously had this focuser working correctly both with StarSense handset and via ASCOM (Celestron unified driver) through the aux on my old Evolution mount. However, now I’ve changed to a Sky-Watcher mount, I need it to function direct through USB.
    • By starman-scott
      Hi, I have changed the focuser on my newtonian but its too short.
      I realise that I can just add an extension tube to it but I’m not sure if that is the best solution.
      I also seem to have have a stray light problem (I’m getting a hazy image on a 5mm eyepiece).
      A third problem is that I find it quite cumbersome that the focuser has to stick out so far (155mm+eyepiece).
      I wonder if I might solve the stay light problem by extending the main telescope tube instead of the focuser and therefore getting the eyepiece closer to the secondary. And also maintain more precision in the focuser by not extending it.
      As it stands the focuser would have to come out 265mm from the centre of the secondary mirror in order to focus. The secondary is 50mm wide. From primary to secondary is 950mm approx.. The primary is 200mm Thanks for reading. Any advice will be much appreciated.
       
    • By wavydavy
      Hi there, starting to get somewhere with my C11 HD Edge. On the 22nd got this one of M1 Crab nebula, in h-alpha. Used the 0.7 focal reducer, bring the FL to 1960mm. The camera was an Atik 314L+ mono. The filter was a baarder 7nm. The mount was a Ioptron CEM120, guided off axis with PHD2.

    • By Zermelo
      The focuser on my SkyWatcher 150i is a basic rack-and-pinion, unsurprising for the price point, but sometimes a bit of a pain to control finely enough. I’m not looking to spend any serious money upgrading it, but I did want to see what I could tweak.

      The first thing I did was to slacken off (slightly) the screws holding the plate against the spindle, as the operation was very tight when new – that helped a bit (and I think that without doing this first, the “friction fit” approach described below wouldn’t have worked). I will eventually get around to taking it all off as per AstroBaby's tune-up.

      Improving the fine control without a major change means doing something with the focusing knobs – they’re quite small, so the effective “gearing ratio” when you operate them is on the harsh side. Some folk have described fitting larger diameter replacements, either bought or made, and even using ones with a planetary-style mechanism to achieve a reduction in the ratio. I didn’t fancy this, as I couldn’t see how the existing knobs were attached to the spindle without trying to prise them apart (possibly terminally). The other option is to increase the effective diameter of the existing knobs, for which purpose a clothes peg is apparently quite popular, but I’ve also come across descriptions of chop sticks inserted into holes drilled at intervals into the circumference, and punctured lids from peanut butter jars.

      I wanted something that was cheap, relatively tidy and non-destructive. The answer seemed to be some sort of thick sleeve that I could fit over the knob. It would need to be a tight fit so as not to slip in use, to be not so large as to foul against either the focuser tube or the main OTA, and to be thick enough that it didn’t flex sideways when grasped. I thought I might find some larger rubber washers that would do the job, but none were thick enough to be rigid in use. However, a bit of searching found these spacers that are apparently used in vehicle shock absorbers.

      My calipers said the diameter of the focuser knobs was around 29.5mm, and the nearest spacers that were available had an internal hole 30mm and outside diameter 60mm. I ordered one that was 10mm thick, not quite as deep as the knobs, but which allowed a bit more space on the inside edge for free operation. I’d hoped the internal hole might be a but undersized when it arrived but it was spot on, so I wound five or six turns of masking tape around the knob first. To avoid taking the tape off when fitting the spacer, I positioned one side first and stretched it across the face as I pushed. When it’s flush with the knob’s outer face, it’s just clear of the focuser body and OTA. There might be enough room to stick some kind of friction surface around the outside to improve the grip, but I don’t think it’s going to be necessary.

      I decided to do only the one knob, so I now have a very Noddy “dual speed” affair.  Because the clearances around the fitted spacer are quite tight, it’s worth checking the positioning of the spindle in the focuser body first – mine was fractionally off centre, so there was more room one side than the other (assuming you have no preference).



       



       

       
       
       
       
       
    • By wavydavy
      Originally brought for my C11 HD Edge, But when used with filter wheel, OAG,  and 0.7 focal reducer the spacing is to far out, hence the reluctant sale of this A+ Condition, unused (other than to see if it worked), focuser. Asking price is £240 which includes special delivery. Bank transfer, paypal or cash/collect ect......
      https://www.365astronomy.com/moonlite-cs-model-dual-speed-crayford-focuser-for-3.3-sc-with-0.95-travel-focal-reducer-drawtube-and-brass-compression-ring-gold-orange-colour.html




×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.