Jump to content

Stargazers Lounge Uses Cookies

Like most websites, SGL uses cookies in order to deliver a secure, personalised service, to provide social media functions and to analyse our traffic. Continued use of SGL indicates your acceptance of our cookie policy.

stargazine_ep29_banner.thumb.jpg.da7f3b163f7bd35187cb558b0346baf6.jpg

Recommended Posts

Hi everyone, 

I am thinking about buying a Celestron Nexstar 6se to use for astrophotography at a very beginner level. I am thinking about using a ZWO ASI224MC as it seems a good option. I have a few questions about how to setup/use it - here they are:

1.) Do you just screw it on where the eyepiece is usually at?

2.) Do you just have the cable going to a computer where you have stacking spect where that stacks the photos it takes?

3.) Does it automatically take photos of planets and DSO’s?

4.) Does it need any filters to get color on nebulae as those are they primary things I want to photograph

Thats all, as you can see I am a beginner to astrophotography and just want to know how to use the camera to take decent pictures.

Thanks all 

Share this post


Link to post
Share on other sites

Hi

Would suggest reading this thread as it will answer some of your questions.

The 6SE is an alt az mount which is fine for visual but not for astrophotography. Can be used for some lunar or planetary photography but not for DSOs. 

 

Edited by johninderby

Share this post


Link to post
Share on other sites
5 hours ago, A_D05 said:

Does it need any filters to get color on nebulae as those are they primary things I want to photograph

In my opinion, with that combination and your intended use, you're asking for trouble. As @johninderby already pointed out, the scope is not suited for deep sky astrophotography. The combination you suggest has a too small field of view ('crop') and a too small imaging scale, making it too slow. If you can stretch your budget, go for something like this in stead

https://www.firstlightoptics.com/pro-series/skywatcher-evostar-80ed-pro-heq5-pro.html

As pointed out in the thread that John linked to, if you already have a dslr, start with that. (But you will the need a so called flattener with this scope)

An alternative is this telescope

https://www.firstlightoptics.com/reflectors/skywatcher-explorer-130p-ds-ota.html

With one of these mounts

https://www.firstlightoptics.com/skywatcher-mounts/skywatcher-heq5-pro-synscan.html

https://www.firstlightoptics.com/skywatcher-mounts/skywatcher-eq5-pro-synscan-goto.html

Edited by wimvb
  • Like 2

Share this post


Link to post
Share on other sites

Hi

The SE mount moves in tiny left right up down movements which will track an object and keep it in the field of view, but the earth is rotating and this is what limits exposure length used when taking photos of deep space objects. Planets are imaged taking video so the frames are much faster.

I think you may be thinking of EAA which live stacks, I'm not familiar with that to know whether the live stacking (which appears to use short exposure lengths) is effective on an altaz mount.

There are members imaging with similar mounts, that they had already, but working within the mounts capabilities/limits but tend to use much shorter focal length lenses on DSOs. I'm not familiar with whether the wedge available for the mount, is it still, is successful in use.

Try to read some more about imaging before deciding what's right for you.

 

Edited by happy-kat
  • Like 1

Share this post


Link to post
Share on other sites

@wimvb as you said earlier about the 80ed with the heq5 mount could I still use a ZWO ASI 224mc with it? And do I need another camera for the guide scope for tracking while imaging or no. Also, how would you setup the guide scope camera if needed

thanks,

andrew

Share this post


Link to post
Share on other sites
2 hours ago, A_D05 said:

@wimvb as you said earlier about the 80ed with the heq5 mount could I still use a ZWO ASI 224mc with it? And do I need another camera for the guide scope for tracking while imaging or no. Also, how would you setup the guide scope camera if needed

thanks,

andrew

Hi A_D05, I too have a S.W. 80ED with HEQ 5PRO mount and https://www.firstlightoptics.com/guide-scopes/skywatcher-startravel-80-ota.html piggy backed on my scope with a touptek guide cam and PHD2 autoguiding software with little or no problems.

Share this post


Link to post
Share on other sites
9 hours ago, A_D05 said:

@wimvb as you said earlier about the 80ed with the heq5 mount could I still use a ZWO ASI 224mc with it? And do I need another camera for the guide scope for tracking while imaging or no. Also, how would you setup the guide scope camera if needed

thanks,

andrew

You will need a seperate guide camera.

A good introduction to astrophotography is this

https://www.firstlightoptics.com/books/making-every-photon-count-steve-richards.html

With the skywatcher ED80 or the skywatcher 130P-DS, you can use a scope for guiding. Our sponsor, FLO, offers complete guide bundles (guide scope & camera).

Also of interest is this link, where you can see how much of the night sky is captured by a combination of scope and camera.

http://astronomy.tools/calculators/field_of_view/?fov[]=3||266||1|1|0&fov[]=109||266||1|1|0&messier=51

Share this post


Link to post
Share on other sites

As mentioned above, I also highly recommend reading this.  https://www.firstlightoptics.com/books/making-every-photon-count-steve-richards.html    
It starts with the very basics, (equipment) goes into all the steps in between (sequence, framing, focus, capture etc) & onto the final product (The finished image) AP has a VERY steep learning curve & this book (in my opinion) will give you really good understanding as to whats involved.

Edited by nephilim

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MarsG76
      This is a close up of IC 2944, also known as the Running Chicken Nebula or the λ Centauri Nebula, with the Bok Globules visible in the upper third of the frame. IC2944 is an open cluster with an associated emission nebula found in the constellation Centaurus, near the star λ Centauri. This image was exposed using a Cooled and full spectrum astro modded DSLR through a 8" SCT at it's native 2032mm (f10) focal length. The total exposure time was 8 hours and 25 minutes, through a UV/IR filter to capture natural colour data.
    • By MarsG76
      The view of the deep southern part of the Milkyway around the Southern Cross, Crux, and Centaurus region. This image was taken with a Canon 5D mk4 using a Canon L-series 24-105mm Lens set to f4. Image taken from a mountain, a dark(ish) location, down southern part of NSW near Kiama, called Saddleback Mountain.
    • By MarsG76
      NGC 6357 is a nebula about 5500 light years away in the constellation Scorpius near the better known NGC 6334, AKA the "Cat's Paw" or "Bear Paw" nebula. This nebula was also given the name War and Peace Nebula because of its appearance in infrared images, the bright western part resembles a dove and the eastern part looks like a skull. This photo was taken through a 8" SCT at f6.3 (1280mm focal length) and exposed using a full spectrum modded and cooled Canon 40D DSLR.
    • By MarsG76
      NGC 6357 is about 5500 light years away in the constellation Scorpius near the better known NGC 6334, AKA the "Cat's Paw" or "Bear Paw" nebula. This nebula was also given the name War and Peace Nebula because of its appearance in infrared images, the bright western part resembles a dove and the eastern part looks like a skull. This photo was taken through a Celestron C8 8" SCT at f6.3 (1280mm focal length), tracked on the CGEM and exposed using a full spectrum modded and cooled Canon 40D DSLR. Total exposure time through the SII, HAlpha and OIII filters was 40 hours.
    • By Anonymous Astronomer
      Hello everyone!
      These are my first DSO photos. Also, this is the second time I've used Adobe Photoshop.😁 
      My purpose for this thread is to share with you my first try and to gather constructive feedback, to help me improve my skills (use of equipment, stacking, image processing, etc.)

      M31 - Andromeda Galaxy
      Imaging telescope: William Optics Zenithstar 61
      Imaging camera: Canon 450D
      Mount: ES EXOS-2 PMC8 (unguided)
      Field Flattener: William Optics ZS61 A
      Software: DSS, Siril and Adobe Photoshop
      Lights: 75 x 60s ISO 800
      Darks: 15
      Flats: 20
      Bias: 20
      Andromeda 07.11.20.tif
       
      M45 - Pleiades
      Imaging telescope: William Optics Zenithstar 61
      Imaging camera: Canon 450D
      Mount: ES EXOS-2 PMC8 (unguided)
      Field Flattener: William Optics ZS61 A
      Software: DSS, Siril and Adobe Photoshop
      Lights: 60 x 60s ISO 800
      Darks: 15
      Flats: 20
      Bias: 20
      Pleiades 07.11.20.tif
       
      I appreciate any kind of feedback!

      Thank you,
      Vlad
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.