Jump to content

Stargazers Lounge Uses Cookies

Like most websites, SGL uses cookies in order to deliver a secure, personalised service, to provide social media functions and to analyse our traffic. Continued use of SGL indicates your acceptance of our cookie policy.

javaruba

SW Esprit 100ED accessories mounting ideas

Recommended Posts

Hi folks,

I just upgraded my main imaging scope to a Sky-Watcher Esprit 100Ed. I'm currently looking for ideas to attach my 60mm guide scope and mini-PC with Pegasus Powerbox on top of the main scope. Probably an additional plate might help help?

Anyone mind sharing some pictures as a reference?

Many thanks in advance.

Jairo

  • Like 1

Share this post


Link to post
Share on other sites

Hello Jairo,

All I did for my 120, which I think has a bit more space between the rings, was cut a bit of 18mm MDF, drilled and countersunk it for the bolt locations then sprayed it black.

The guide scope is bolted through the MDF top plate and straddles the front ring so should be reasonably stiff, it guides well. Pegasus pocket power box and raspberry pi are just held down by self-adhesive velcro.

The little red box is just a high current capable buck converter to power the Pi4 from the 12v pocket power box, rather poorly hung off the side of the pi....

IMG_20200911_224105.thumb.jpg.13775f80519de215363e8f0568bdf150.jpg

The dodgy brown colour of the guide scope is because it spent a summer near a window a few years ago - you can see where I've had to slide it forward in the rings to get it to fit now it has stuff behind it. Still working nicely!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By onevelvet
      Good evening all, I am looking for help/ advice on a telescope I have had for a few years and don't know how to set up , it is a SkyWatcher and had a motor and something which looks like one can set up co-ordinates with, can anyone shed any light on this ? 
      Thank in advance,
      Chris. 



    • By Brownthunder93
      Anyone have any idea where I can get a replacement counterweight bar/shaft for my EQ5 mount? 
    • By Astro_Dad
      Looking forward to receiving my 102MC in the next few days/weeks depending on supply. Does anyone have any experience, tips/advice?  Looks like a good grab and go particularity for planetary observation - interesting “next generation” mount. 
    • By JoeS81
      Hi everyone,
      I'm completely new to telescopes and know nothing but I want to learn and I need some advice!
      I have a budget of £200 which I can't stretch. I really like both the Skywatcher Heritage 150p and SW Skyliner 150p which I believe has been along longer than the Heritage.
      I would like to take the scope out occasionally to dark skies (so the heritage would be easier to transport) but with 2 very young children at home the reality is that I will mostly be using the scope in the back garden.
      Obviously both scopes are 150p but come with different accessory spec (specs below).... please could someone advise which would give me the most bang for my buck?!
       
      Heritage 150p:
      Magnifications (with eyepieces supplied): x30 & x75
      Highest Practical Power (Potential): x300
      Diameter of Primary Mirror: 150mm
      Telescope Focal Length: 750mm (f/5)
      Eyepieces Supplied (1.25"): 10mm & 25mm
      Parabolic Primary Mirror
      3-arm Secondary Mirror Spider Support
      Red Dot Finder
      Wooden Alt-Azimuth Mount
      Collapsible/ Extendable Tube Assembly
      Weight Approx 7.5kg
      Supplied with Gift Box
      33% more Light Gathering than 130mm
      Skyliner 150p:
      Magnifications (with eyepieces supplied): x48 & x120 Highest Practical Power (Potential): x306 Diameter of Primary Mirror: 153mm Telescope Focal Length: 1200mm (f/8) Eyepieces Supplied (1.25"): 10mm & 25mm Parabolic Primary Mirror 0.5mm Ultra-Thin Secondary Mirror Supports 6x30 Finderscope Direct SLR Camera Connection Wooden Alt-Azimuth Mount with Accessory Tray 73% more Light Gathering than 114mm Many thanks!
       
    • By DaveSw
      Is anyone here controlling a Vixen SP2 (SB One) with an external computer for GoTo, etc. (for AP use)?  Is it even possible?  I have been unable to find any references to it. I see Vixen mounts suggested as fine, but expensive mounts and references to SB Ten providing GoTo capabilities but nothing to suggest it’s doable with the “simpler” version. 

      I’m  looking for my first solid mount to do photography with a 70-80mm refractor. Starting with a mirrorless APC camera and eventually a cooled mono camera. I’ve been considering mounts I can move in and outdoors relatively easily. This mount and the HEQ-5 are the two I’m looking at most seriously at this time. The local market (western Canada) for used mounts seems to have dried up during recent times, so new is what I’m looking at. (Vixen because of their “it’s already fiddled and should just work” reputation and the HEQ-5 because it’s well known with fixes and mods well defined. (It’s also more affordable by a fair margin here.)
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.