Jump to content

Stargazers Lounge Uses Cookies

Like most websites, SGL uses cookies in order to deliver a secure, personalised service, to provide social media functions and to analyse our traffic. Continued use of SGL indicates your acceptance of our cookie policy.

Dubliner

Question of updating MC firmware for upgraded Auto Dob

Recommended Posts

Hi,
I have a Skywatcher 8inch Flexi/collapsible Auto tracking Dob of 10 years vintage and recently 'upgraded' it with the Skywatcher Wifi plug in module in place of the mini handset and now it is a Goto. This is not an officially approved upgrade - but it works. My question is to anyone out there who did the same upgrade - perhaps by plugging a Goto handset which some did about 9 years back and if they ever tried to update the motor control firmware and with what results. 
The MC version on my Dob shows as version 2.12.90 but a newer version on Skywatcher site is available but I'm afraid to risk it without asking around. 

Optional read - some background and why I ask the question above :
Been away from the hobby a long time for various reasons so decided to wake up my 8" Auto Dob from years of storage. This was bought about 10 years ago and was just about a year prior to the release of a Goto version. Some folk around here found that using a goto handset (from the Skywatcher range) were able to make their Auto in a Goto by merely replacing the mini handset that came with the Auto Dob. Not wanting to risk the then £150 or more a handset that may or may not work  I forgot the matter - that was 9 years ago. There was a lot of discussion back then that the Auto version was really meant to be a Goto but that the motors were not accurate enough or the software was too buggy and Skywatcher got cold feet and dropped the Goto functionality and sold it as a tracking Dob and great scope it is. Returning now I took a gamble on plugging one of their wifi modules (in place of the mini handset) and hey presto it works! Fantastic!
Trying it out indoors (what choice with our weather) and just going on an digital inclinometer ( the Azm looks good) it was getting on most 'targets' to within 1 degree and often spot on. Outdoors on the only 2 occasions I had in the last month it was a little disappointing in that it was often missing by 5 or 10 degree both in Alt and Azm. I've done all the leveling, alignments, adjusting the clutch and balancing of the OTA from old posts here on the topic and it did help.
A few days ago I read that disabling the auxiliary encoders can really help in getting better and more consistent gotos. My understanding is that they come into play for allowing for manual movements or it the tube gets knocked accidentally in use . The Synscan App has this option but it is not selectable for me maybe because of the old MC firmware I have. This newest version of the on the Skywatcher site states "Firmware: Skyliner Series Dobsonian GO-TO Mounts, Version 2.09 -For 8" to 16" Dobsonian GOTO mounts. Support turning off auxiliary encoders". 
So I loaded the windows software to flash the MC firmware and got the new version mentioned above but I chickened out on pressing the 'update' button! I'd hate to brick the electronics as this scope was never originally designed as a Goto anyway and it old electronically speaking,  so I may be pushing my luck too far as it may not like being flashed over. I am happy with what I have so why risk it - but the temptation is killing me to be more happier! 

Sorry for rambling on a bit.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Astro_Dad
      Looking forward to receiving my 102MC in the next few days/weeks depending on supply. Does anyone have any experience, tips/advice?  Looks like a good grab and go particularity for planetary observation - interesting “next generation” mount. 
    • By JoeS81
      Hi everyone,
      I'm completely new to telescopes and know nothing but I want to learn and I need some advice!
      I have a budget of £200 which I can't stretch. I really like both the Skywatcher Heritage 150p and SW Skyliner 150p which I believe has been along longer than the Heritage.
      I would like to take the scope out occasionally to dark skies (so the heritage would be easier to transport) but with 2 very young children at home the reality is that I will mostly be using the scope in the back garden.
      Obviously both scopes are 150p but come with different accessory spec (specs below).... please could someone advise which would give me the most bang for my buck?!
       
      Heritage 150p:
      Magnifications (with eyepieces supplied): x30 & x75
      Highest Practical Power (Potential): x300
      Diameter of Primary Mirror: 150mm
      Telescope Focal Length: 750mm (f/5)
      Eyepieces Supplied (1.25"): 10mm & 25mm
      Parabolic Primary Mirror
      3-arm Secondary Mirror Spider Support
      Red Dot Finder
      Wooden Alt-Azimuth Mount
      Collapsible/ Extendable Tube Assembly
      Weight Approx 7.5kg
      Supplied with Gift Box
      33% more Light Gathering than 130mm
      Skyliner 150p:
      Magnifications (with eyepieces supplied): x48 & x120 Highest Practical Power (Potential): x306 Diameter of Primary Mirror: 153mm Telescope Focal Length: 1200mm (f/8) Eyepieces Supplied (1.25"): 10mm & 25mm Parabolic Primary Mirror 0.5mm Ultra-Thin Secondary Mirror Supports 6x30 Finderscope Direct SLR Camera Connection Wooden Alt-Azimuth Mount with Accessory Tray 73% more Light Gathering than 114mm Many thanks!
       
    • By AstroRuz
      For sale is my beloved but now superfluous to requirements HEQ5 Pro for £650
      It's in a used condition as you would imagine. I've had it for about 4 years and found great success with this mount. Ideal for those beginning astrophotography and also good for visual users.
      I'm calling it "deluxe" due to the upgrades I've had done.
      - It's belt modified
      - It's had brand new bearings and grease
      - The backlash has been expertly setup 
      - It has the latest polar scope
      - The power port has been replaced with an aviation style port which is a lot more secure
      It'll come with the hand controller and at least 1 counterweight (if I can find the second it'll come with both). The polar scope cover has been lost. The counterweight is rusty as always. There is some marring on the counterweight bar housing as shown in the photos.
      It also will come with the modified power cable required also.
      Note: the power LED sometimes doesn't illuminate but the mount is still powered (please see the photo with the hand controller).
      Collection or local delivery within Northampton







    • By Spacecake2
      Hello,
      I know you've seen these questions a lot (unless your new) but I'm struggling a lot on if I should buy a Skywatcher 250px (10") or 200px (8") (dobsonians). I have a 5 inch and i'm looking for a big step up for noticeable changes. 
      Thank you 
       
    • By Hoopla
      Hi All,
      im totally new to this and have been getting setup over the past 3 months. I’ve purchased a Skywatcher 150P on a EQ3 Pro mount. 
       
      I have a 2x and 3x Barlow with 10x and 20x eyepieces. I’m trying to view and photograph Mars as it’s so bright at present and easy to see however I’m really struggling to see anything more than a bright ball when viewing and when photographing it’s just a blurry ball. 
       
      I have a canon 700d DSLR with t ring and adaptors  
      can folk suggest what combination of Barlow / eyepiece would be required to view Mars in all its glory and possibly lens and iso/exposure settings to get some nice shots too please. I’m aware I may need to stack and am tech savvy so this bit should be ok. I just can’t seem to get anything at present to process.
      help!! 
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.