Recently Browsing 0 members
No registered users viewing this page.
For sale is my beloved but now superfluous to requirements HEQ5 Pro for £700
It's in a used condition as you would imagine. I've had it for about 4 years and found great success with this mount. Ideal for those beginning astrophotography and also good for visual users.
I'm calling it "deluxe" due to the upgrades I've had done.
- It's belt modified
- It's had brand new bearings and grease
- The backlash has been expertly setup
- It has the latest polar scope
- The power port has been replaced with an aviation style port which is a lot more secure
It'll come with the hand controller and at least 1 counterweight (if I can find the second it'll come with both). The polar scope cover has been lost. The counterweight is rusty as always. There is some marring on the counterweight bar housing as shown in the photos.
It also will come with the modified power cable required also.
Note: the power LED sometimes doesn't illuminate but the mount is still powered (please see the photo with the hand controller).
Collection or local delivery within Northampton
I wanted to have the sensor cleaned on my canon 500D , a quick email to skears photographic in Northampton http://www.skearsphoto.com/ was swiftly replied with the cost £30 , I dropped it off and waited a week due to COVID-19 and camera being quarantined for three days first , picked up with a service report highlighting a mark on sensor, on pictures there was a black speck I thought was dirt , camera pictures nice and clean otherwise, would recommend.
im totally new to this and have been getting setup over the past 3 months. I’ve purchased a Skywatcher 150P on a EQ3 Pro mount.
I have a 2x and 3x Barlow with 10x and 20x eyepieces. I’m trying to view and photograph Mars as it’s so bright at present and easy to see however I’m really struggling to see anything more than a bright ball when viewing and when photographing it’s just a blurry ball.
I have a canon 700d DSLR with t ring and adaptors
can folk suggest what combination of Barlow / eyepiece would be required to view Mars in all its glory and possibly lens and iso/exposure settings to get some nice shots too please. I’m aware I may need to stack and am tech savvy so this bit should be ok. I just can’t seem to get anything at present to process.