Jump to content

Banner.jpg.b89429c566825f6ab32bcafbada449c9.jpg

Fireball Report/Perseid Meteors


Recommended Posts

Last night was out with the kids looking at the Perseid Meteor shower and we saw a cracker of a fireball at 10:35pm (UK time). My all sky camera caught it too close to the horizon.

Reported it here https://fireball.imo.net/members/imo_view/report/203941

We saw quite a few Perseids over the course of an hour or so. Unfortunately my All sky camera (ASI224MC) didnt pick most of them up. I think this is probably one of the most sensitive CMOS cameras out there, so I hoped to record more. However, I guess its because they only last for a small fraction of a second, and its a question of light intensity vs time (Dose) for the meteor to be seen on the image. But if left me thinking - for meteor detection do you want a very high gain to pick out those faint meteors. I guess the down side of this will be increased noise and graininess of the image.

And here is the photo of the fireball from my all sky camera (gain set at unity=135)

-2020-08-12T22-35-00-117.thumb.png.a54db8b6e28d74e84e1978bc74c6ee05.png

 

 

  • Like 4
Link to comment
Share on other sites

29 minutes ago, festoon said:

Last night was out with the kids looking at the Perseid Meteor shower and we saw a cracker of a fireball at 10:35pm (UK time). My all sky camera caught it too close to the horizon.

Reported it here https://fireball.imo.net/members/imo_view/report/203941

We saw quite a few Perseids over the course of an hour or so. Unfortunately my All sky camera (ASI224MC) didnt pick most of them up. I think this is probably one of the most sensitive CMOS cameras out there, so I hoped to record more. However, I guess its because they only last for a small fraction of a second, and its a question of light intensity vs time (Dose) for the meteor to be seen on the image. But if left me thinking - for meteor detection do you want a very high gain to pick out those faint meteors. I guess the down side of this will be increased noise and graininess of the image.

And here is the photo of the fireball from my all sky camera (gain set at unity=135)

-2020-08-12T22-35-00-117.thumb.png.a54db8b6e28d74e84e1978bc74c6ee05.png

 

 

 

I got a similar capture last night, that was the only one of note.  I have a little meteor camera that can pick up meteors live as they happen at 25 FPS down to mag +4 or +5 but at 8mm FL.   I think the light just gets too spread out on the all sky cameras, which are shooting at 2.1 or 2.5mm FL and F1.6.  For example I recorded probably 50+ perseids over 2 nights at 8mm covering a small part of the sky, and got about 4 on the asll sky camera.

Edited by tooth_dr
  • Like 1
Link to comment
Share on other sites

8 minutes ago, tooth_dr said:

 

I got a similar capture last night, that was the only one of note.  I have a little meteor camera that can pick up meteors live as they happen at 25 FPS down to mag +4 or +5 but at 8mm FL.   I think the light just gets too spread out on the all sky cameras, which are shooting at 2.1 or 2.5mm FL and F1.6.  For example I recorded probably 50+ perseids over 2 nights at 8mm covering a small part of the sky, and got about 4 on the asll sky camera.

I like your thoughts - to try a slightly longer FL. I'm working at 1.55mm at f2

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.