jgs001 Posted January 9, 2009 Share Posted January 9, 2009 A single frame shot with the 450d on the C80ED with a 2xTC, a Tal x2 Barlow and an Antares 5x Barlow (x20, F150). Murder to focus, and don't breathe or move anywhere within a 10 foot radius whilst in use... An interesting little experiment, it won't be repeated, it's just too damn hard. Link to comment Share on other sites More sharing options...
MrEd Posted January 10, 2009 Share Posted January 10, 2009 10 feet ....Must have been tricky with a light breeze.A nice attempt though John, Looks like you need a filter to combat that dispersion.Ed Link to comment Share on other sites More sharing options...
Psychobilly Posted January 10, 2009 Share Posted January 10, 2009 Can you tweak the RGB channel alignment slightly in CS? I Just had a play with it ...Billy... Link to comment Share on other sites More sharing options...
Sam Posted January 10, 2009 Share Posted January 10, 2009 Good effort John, that's a few barlows stacked up! Link to comment Share on other sites More sharing options...
jgs001 Posted January 10, 2009 Author Share Posted January 10, 2009 Thanks, just wanted to see if I could get it on the SLR. Billy, I've not worked that one out yet... Any pointers ? Link to comment Share on other sites More sharing options...
Psychobilly Posted January 10, 2009 Share Posted January 10, 2009 Hi John,Open the image...Selecty the channels tab (in the Layers/Channels/Paths) "window"Make sure all channels have "eyes" (visible) but just select one channel (RED) use the move tool (Arrow with a cross below right) and re-align that channel.. Then deselect the RED channel and do the same for BLUE...Billy... Link to comment Share on other sites More sharing options...
jgs001 Posted January 10, 2009 Author Share Posted January 10, 2009 Oohh.. that worked well and far more easily than I expected. Link to comment Share on other sites More sharing options...
Psychobilly Posted January 11, 2009 Share Posted January 11, 2009 Nice one John ,You can do the same thing in Registrax - RGB Align tab I think it is...Billy... Link to comment Share on other sites More sharing options...
jgs001 Posted January 11, 2009 Author Share Posted January 11, 2009 Cheers. I guess I'd have to load a resized jpg into registax as it won't take the 450d cr2 file, and the image size is also too big. Much easier this way. Link to comment Share on other sites More sharing options...
Psychobilly Posted January 11, 2009 Share Posted January 11, 2009 Hi John,I wasn't suggesting that you did it for this image... It was a general heads up that RGB align is the way to fix these issues and its available in registrax if you use a webcam to grab the images...Really easy to do in PC/CS for DSLR images...Billy... Link to comment Share on other sites More sharing options...
jgs001 Posted January 11, 2009 Author Share Posted January 11, 2009 gotcha... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.