Jump to content

Stargazers Lounge Uses Cookies

Like most websites, SGL uses cookies in order to deliver a secure, personalised service, to provide social media functions and to analyse our traffic. Continued use of SGL indicates your acceptance of our cookie policy.

stargazine_ep28_banner.thumb.jpg.b94278254f44dd38f3f7ee896fe45525.jpg

Recommended Posts

I signed on a few days ago but still waiting for an invitation and link to the beta software. You can’t just download it. 

Share this post


Link to post
Share on other sites

It appears the latest version of skysafari now has SkySafari synscanlink as a mount option! Not had a chance to test it though, only looked as someone complained they’d not been added to the  beta programme. 

Peter

Share this post


Link to post
Share on other sites

That was probably me!😉 However I’m still not clear whether I can operate my AZ Gti with one iOS device running both Sky Safari and the Synscan app and I thought that was the point of the beta. I still need to use both my iPhone running one app and iPad running the other. 

Share this post


Link to post
Share on other sites

Was a Rob... I deleted the previous beta programme and they didn’t seem to get round to reinviting me.... 

I tried indoors for a few mins with my iPad.  You neEd to ios connect to the mount wifi, then connecting from inside skysafari hurls you over to synscan to connect to the mount which then hurls you back to skysafari.... Where you can move, align etc...
My iPad kept wanting to reconnect to my Router, so I didn’t dig deeper. 
One issue I have with using a phone app for moving the scope is knowing where the arrows are in the dark or not looking at them. If I had access to the 3D printers I’d make myself a screen mask with holes in it so I could feel my way round.

 

peter

 

Share this post


Link to post
Share on other sites

I’ve just seen this topic. Given it’s been years in development I had basically given up on using my iPhone only with my az gti and sky safari in WiFi mode.

However, I was out last night and decided to give the synscanlink setting a try with my iPhone. And it worked perfectly! I set up alignment with SynScan as normal, then opened SkySafari and connected to the scope and that was it. Great result!

Share this post


Link to post
Share on other sites

Yes I’ve found it does work too now. In fact if you connect with Sky Safari first it will then open the synscan app. You can use either app to align with. 

Share this post


Link to post
Share on other sites

Hello - tonight is my first night with everything setup. When testing a few days ago the GoTo function worked perfectly, now I can drive the scope manually through safari but goto does nothing - any help for a newbie?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Astro_Dad
      Looking forward to receiving my 102MC in the next few days/weeks depending on supply. Does anyone have any experience, tips/advice?  Looks like a good grab and go particularity for planetary observation - interesting “next generation” mount. 
    • By JoeS81
      Hi everyone,
      I'm completely new to telescopes and know nothing but I want to learn and I need some advice!
      I have a budget of £200 which I can't stretch. I really like both the Skywatcher Heritage 150p and SW Skyliner 150p which I believe has been along longer than the Heritage.
      I would like to take the scope out occasionally to dark skies (so the heritage would be easier to transport) but with 2 very young children at home the reality is that I will mostly be using the scope in the back garden.
      Obviously both scopes are 150p but come with different accessory spec (specs below).... please could someone advise which would give me the most bang for my buck?!
       
      Heritage 150p:
      Magnifications (with eyepieces supplied): x30 & x75
      Highest Practical Power (Potential): x300
      Diameter of Primary Mirror: 150mm
      Telescope Focal Length: 750mm (f/5)
      Eyepieces Supplied (1.25"): 10mm & 25mm
      Parabolic Primary Mirror
      3-arm Secondary Mirror Spider Support
      Red Dot Finder
      Wooden Alt-Azimuth Mount
      Collapsible/ Extendable Tube Assembly
      Weight Approx 7.5kg
      Supplied with Gift Box
      33% more Light Gathering than 130mm
      Skyliner 150p:
      Magnifications (with eyepieces supplied): x48 & x120 Highest Practical Power (Potential): x306 Diameter of Primary Mirror: 153mm Telescope Focal Length: 1200mm (f/8) Eyepieces Supplied (1.25"): 10mm & 25mm Parabolic Primary Mirror 0.5mm Ultra-Thin Secondary Mirror Supports 6x30 Finderscope Direct SLR Camera Connection Wooden Alt-Azimuth Mount with Accessory Tray 73% more Light Gathering than 114mm Many thanks!
       
    • By AstroRuz
      For sale is my beloved but now superfluous to requirements HEQ5 Pro for £650
      It's in a used condition as you would imagine. I've had it for about 4 years and found great success with this mount. Ideal for those beginning astrophotography and also good for visual users.
      I'm calling it "deluxe" due to the upgrades I've had done.
      - It's belt modified
      - It's had brand new bearings and grease
      - The backlash has been expertly setup 
      - It has the latest polar scope
      - The power port has been replaced with an aviation style port which is a lot more secure
      It'll come with the hand controller and at least 1 counterweight (if I can find the second it'll come with both). The polar scope cover has been lost. The counterweight is rusty as always. There is some marring on the counterweight bar housing as shown in the photos.
      It also will come with the modified power cable required also.
      Note: the power LED sometimes doesn't illuminate but the mount is still powered (please see the photo with the hand controller).
      Collection or local delivery within Northampton







    • By Spacecake2
      Hello,
      I know you've seen these questions a lot (unless your new) but I'm struggling a lot on if I should buy a Skywatcher 250px (10") or 200px (8") (dobsonians). I have a 5 inch and i'm looking for a big step up for noticeable changes. 
      Thank you 
       
    • By Hoopla
      Hi All,
      im totally new to this and have been getting setup over the past 3 months. I’ve purchased a Skywatcher 150P on a EQ3 Pro mount. 
       
      I have a 2x and 3x Barlow with 10x and 20x eyepieces. I’m trying to view and photograph Mars as it’s so bright at present and easy to see however I’m really struggling to see anything more than a bright ball when viewing and when photographing it’s just a blurry ball. 
       
      I have a canon 700d DSLR with t ring and adaptors  
      can folk suggest what combination of Barlow / eyepiece would be required to view Mars in all its glory and possibly lens and iso/exposure settings to get some nice shots too please. I’m aware I may need to stack and am tech savvy so this bit should be ok. I just can’t seem to get anything at present to process.
      help!! 
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.