Recently Browsing 0 members
No registered users viewing this page.
I always been fascinated by astronomy and finally purchased a celestron nexstar 8se. Setup went smoothly but I'm a little stuck on the lens. I attached the star diagonal to the telescope and focused in on an object. I was able to see a part of the leaf on the plant in my house and I attached a picture of that. Moving the telescope left and right allowed me to see other things. I then took out the 25mm lens and can see through that when not attached to the telescope. I can see my sandals and feet through the lens and attached a picture of that. I then inserted the 25mm lens into the star diagonal and that's where all hope gets lost. I see white (assuming that's my wall) and yes the cover on the telescope is also off. No matter where I move the telescope. All I see is white. I tried last night in clear skies and pointed towards some clear stars using the skyportal app to align but I didnt see anything except pitch black through the lens. I also played with the focus but nothing. Am I doing something wrong, I would think the 25mm wouldnt be so zoomed in that I cant see anything? Thanks for any help you can provide me. Looking forward to exploring!!
I continue my reports from observatories I have visited. This one is very special for me, I did my education in astrophysics at this place in the 1990s. My girlfriend and I took the car this weekend and visited Saltsjöbaden for a walk, only 30 km from where we live. We ended the walk up at the Stockholm's Observatory.
Some photos from this beautiful place:
One of the observatories at this photos is the astrograph which I already earlier had written about.
Hi, I have changed the focuser on my newtonian but its too short.
I realise that I can just add an extension tube to it but I’m not sure if that is the best solution.
I also seem to have have a stray light problem (I’m getting a hazy image on a 5mm eyepiece).
A third problem is that I find it quite cumbersome that the focuser has to stick out so far (155mm+eyepiece).
I wonder if I might solve the stay light problem by extending the main telescope tube instead of the focuser and therefore getting the eyepiece closer to the secondary. And also maintain more precision in the focuser by not extending it.
As it stands the focuser would have to come out 265mm from the centre of the secondary mirror in order to focus. The secondary is 50mm wide. From primary to secondary is 950mm approx.. The primary is 200mm Thanks for reading. Any advice will be much appreciated.
I'm aiming for the best possible field illumination for my Explore Scientific PN208 f/3.9 imaging newtonian. The scope is 5 years old now and while doing maintenance I wanted to do something about the design flaws as well.
With the current secondary holder design it's impossible to center the mirror beneath the focuser. My question is: is this really an issue when the entire primary is visible? I read about optimal field illumination when the secondary is centered, but this isn't achievable with this telescope.
I attached an image showing the (very bad aligned and already degrading) secondary at the moment. This is as far down as I can go, I would need to replace the holder screws with longer threads to go further but I don't know if it would make any difference for field illumination?
Thanks in advance,
Hello, I am having a problem with a relatively expensive flat field eyepiece in a combination with a newtonian reflector. I am unable to achieve proper focus with that eyepiece because when I focus it on axis, the edges are blurry. When I focus it at the edge, the center field is out of focus. I don't want to mention the concrete type of this eyepiece because I received it with a spot on the bottom barrel, therefore I cannot be sure whether it has been dropped. This eyepiece has very good reviews on this forum. Optically it looks good and there is no rattle. My question is whether these flat field eyepieces are usable with newtonians as these telescopes doesn't generally suffer from the field curvature. Many thanks for help.