Recently Browsing 0 members
No registered users viewing this page.
I've just bought my first telescope, a 10 inch Dobsonian, Saxon brand (same as Skywatcher).
In daylight I've collimated it with a laser collimator. Also in delight I've centred the finderscope on a house on the horizon (probably 5 km away). The image is inverted and the left side appears on the right. I understand that's normal.
The house is also centred in the eyepiece and the view is inverted and left appears right, as with the finder scope. BUT the horizon is at about a 60 degree angle ( see pdf sketch attached). Is this normal? Or am I doing something wrong? Or is there a problem with the telescope?
Many thanks in advance
I'm relatively new to the whole telescope thing but have done my research and was fixed on getting the Orion skyquest XT8i or XT10i. By spending that much money, I didn't like the idea of purchasing it online from their website without seeing it in person (and not having the reassurance of being able to take it back) and looked for stores in the UK that would supply them. After plenty of research, it seems like they don't exist anymore and they are only in the US? Is this right or could anyone help me?
(I've looked at the Sky-watcher 250PX/200PX flextube skyscan goto but it is significantly heavier and the noise of the goto mechanism sounds like a table saw so that's put me off of it...)
Any help would be much appreciated,
Friends, I am back with a tutorial video on how to modify your Sky Watcher HEQ5-PRO mount or its American twin, the Orion Sirius EQ-G into a belt driven mount.
The benefits of converting to a belt drive is that you don't have to worry about Backlash. The procedure took me about an hour to complete.
Link is below
TL;DR: are there any cheap ways, including secondhand, of mounting a 130P-DS for not-completely-terrible results?
I am looking to buy a telescope as a gift for a family member. I had in mind a budget of around £150-£200, and from looking at advice had almost settled on the Sky-Watcher Explorer 130P. But then I realised that there's a good chance that if they get into astronomy there's a good chance that my relative will want to do some photography, and would probably be interested in attaching their micro four thirds camera. I've learnt that the 130P is not great for this as you cannot get prime focus, so you need to look at the Sky-Watcher Explorer 130P-DS instead.
Great, I thought! It's a bit cheaper, but it isn't available in a kit with any form of mount. OK, I'll need to get one of those too...
Then I started looking at mounts. Oh my, those things crash through the top of my budget! Even the EQ2 mount on its own, when you can find it, is about £115.
(Given that you can get the spherical version of the Sky-Watcher 130 on that mount for £155 from FLO, that seems to value the OTA part at somewhere around the £40 mark.)
So, I'm after advice on whether there is an affordable way of doing this.
I've read enough on this forum and other sites around the web to know that the main recommendation is that the heavier duty the better. Something like an EQ3 or upwards. And that for AP a lot of people seem to view an HEQ5 as a starting point. But since I can't stretch to that, I'm OK with leaving it as an upgrade path for my relative if that's the way they want to go (or option for future gifts!).
I know that for next-to-no budget I'm not going to be able to give something that will get the best out of the telescope. I know that getting motors and whatnot to do the guiding that will make DSO photography possible is way out of the realms of possibility. What I'm hoping for is some sort of option that gives acceptable results. Usable rather than unusable. Limiting the results rather than destroying them! Getting this set up so that they can do reasonable observation at first, and maybe give a try at attaching their m4/3 camera to try photographing the moon. If that whets their appetite then mount upgrades can be possible later.
Since I'm planning on a new OTA, I'd be happy with going secondhand for the mount.
I've been trawling ebay, and see the odd thing like this come up:
To my untrained eye, it looks like there's an EQ2 mount on that, so I'm wondering whether that would do the trick. (Working on the, possibly faulty, assumption that if EQ2 is viewed by Sky-Watcher as being sturdy enough to supply as the kit mount for the 130 and 130P, it's probably up to scratch for observing with the 130P-DS too.)
Even that, at another £58 inc postage for the buy it now would be over my budget, but I'm wondering more generally whether trying to grab something like that to essentially discard the tube would even be feasible as an option if I can get one at the right price.
Or, of course, I'm open to any other ideas and suggestions that the forum might have.
Thanks in advance, and clear skies.