Recently Browsing 0 members
No registered users viewing this page.
Wow, First time I've seen the Moon through a telescope and what a sight. We had a good look at the Moon last night. It was also a chance to play around with the different eyepieces and what a difference that made. The red dot pointer was spot on after I found the little cardboard trick on you tube. Only using the 6SE in manual mode at the moment. Hopefully the cables for the firmware updates will be here today and the sky will be clear tonight. I fear that tonight will be cloudy, seems to be building up now, even looks like we may have a little rain. Looking at the moon was a little bit emotional. I am so happy we have the telescope. One question someone may be able to help with, is there a way to make the focusing on the Celestron 6SE a little less coarse.. It's almost like we need some kind of fine focus. Don't get me wrong, the focus is great , it's just a little bit sensitive, It's almost as if it needed something with a larger circumference.
We were looking at the moon with mouths wide open in awe of the beauty of something ordinarily we take for granted. I think we are hooked into astronomy, although there is so much to learn, at least now we have the time. We are finding that we now have the urge to take pictures, and also record our observing. Do people just use notebooks for observing notes or is there some kind of correct way of doing things
Thanks for all the words of encouragement
Sunday 24th May, from 7:30pm BST, 200p F/5, EQ3-2, diy Onstep Goto.
I've enjoyed watching Venus wane to a thinner & thinner crescent recently, but have never observed Mercury. Having the 2 planets & the Moon only a few degrees apart this week was an opportunity not to be missed. But the gap between the trees & the hill to my West is only about 1 "fist" wide - maybe 40 minutes of observing time. And the late sunset time means Venus would have moved behind the hill before becoming naked-eye visible.
I don't have a permanent setup & can't see Polaris from my patio so I observe from a very rough "polar alignment" & have marked the tripod leg positions on the patio so I don't need to Polar, or Star align every session.
So, having made sure to "Park" the scope at the end of the previous night's session I could just plonk the setup on the marks, "Unpark", "Goto Venus" & lo and behold a tiny crescent Venus appeared about 1 degree from the centre of the the 9x50 Finder in a sky that was clear of cloud but still pure white from the solar glow ! Isn't Goto wonderful ?
Venus was such a beautiful thin 4% crescent with "horns" stretching to the meridian. At first it was shimmering but that must have been a heat plume because a tiny tweak of the focus steadied the image. The seeing was surprisingly good for the low altitude. I enjoyed the view at up to X250 (4mm TMB), before a Goto to Mercury.
Mercury was not visible in the Finder but was a tiny dot in the 32mm Plossl. At higher powers I saw it as a 45% crescent. I know it was about 62% illuminated so the sky must have been too bright for me to see its full extent. I don't claim to have seen any detail - the brightness just reduced steadily from the limb towards the terminator.
I still couldn't see the Moon naked eye so did another Goto & looked in the Finder. Nothing ! But the bright sky must have been fooling my eye because when I forced myself to focus at infinity it popped in sight. The visible crescent was about half the thickness of a crosshair ! In a 20mm Plossl I could see about 6 medium sized faint, ghostly craters along the limb of a 4% crescent.
So in about half an hour I had my first sight of Mercury, & seen my thinnest crescents of Venus & Luna. Isn't this hobby fantastic ? 😀
Hi guys! 🙂
My name is Andrew, I only just stumbled across these forums just now! Couldn’t have come across a better community to help me with some questions I have!
So I’ve Come to the conclusion that I’m going to be buying a Celestron Nexstar 6SE telescope everything about it appeals to me. I currently own a much older manual celestron telescope and am ready for my first proper telescope!
I do plenty of photography and own a DSLR and am aware that with this telescope that it comes with a software that will record video of what you’re gazing at and stack the images if I’m correct?
because I’m familiar with normal photography and not so much with Astro photography I was wondering if anyone could help me out. For the stocking software, is that all the process completed within the telescope and no DSLR? Or is that recorded with the DSL are and then the software stacks? What kind of adapters would I need to be getting into AP? By the way I’m looking at mainly photographing the moon and hopefully get some awesome shots of the other planets too! 😄 not so much deep AP, as from my research I’ve gathered that this isn’t the greatest for it... anyways.
Is it better to use a DSLR and an adapter on the eyepiece for imaging? Or the stacking and what would I need for best result stacking images, especially of planets like Saturn and Jupiter?! Are the individual eyepiece attachments you buy for the telescope, cameras in themselves? What is aci? I’ve got no clue! Haha a lot to learn!
I thought I was on the right track looking by myself for equipment and I came across the 10MP celestron Neximage eyepiece or whatever it is? I’m not entirely sure? And also what is a T ring? Is that a Dslr adapter? Does the stacking software come with the telescope or with additional purchases?!
Sorry for the bombardment of questions! Obviously I’m very excited to get going and am very keen on getting some equipment! Any answers are much appreciated!
Have a great day!
So on Tuesday night I spent the evening imaging the moon with my Celestron 9.25 SCT and DSLR as shown below and am happy with the images I collated (I only took images as I did intend to take capture video but I got carried away and time was getting on).
I have approx 350 jpeg (and the equivalent in raw) images and have used the Microsoft image composite editor to stitch the frames together without editing them first etc but I wonder if I'm going the images an injustice?
I'm not ready to pay for editing software as I know there is a lot of very good free downloads out there and I'm asking for recommendations. Should I be processing the frames before/after stitching and what software would you recommend? Please offer any advice you have.
I will post the resulting image once I'm happy with the outcome 😁
Thanks in advance!