Recently Browsing 0 members
No registered users viewing this page.
By kris h
I was given this Unicon Refractor Telescope a couple of years back now, and want to start using it.
I have the bracket but it's missing a finderscope. A finder similar as the one pictured would be great but anything that would fit will be fine.
(Not My Pictures)
Skywatcher 80 ED DS-Pro outfit including matched flattener and motor focus. Now only £350
This kit gives you a great introduction to astronomy and imaging, which is why it's so popular. You can see details over at FLO but there is:
80 ED Ds-Pro OTA (Objective Lens Diameter: 80mm, Telescope Focal Length: 600mm, f/7.5)
SW Eyepiece (2"): 28mm
2”/50.8mm Di-Electric Star Diagonal
Dual-Speed 11:1 2” Crayford Focuser (Backlash-Free)
Supplied with Tube Rings & Mounting Plate - please note there is a longer black vixen type dovetail fitted, not the fancy new green short one you will see on the FLO site
SW motor focus and fitting kit - I've never used this, hence it's not fitted (more details over on FLO)
Dedicated SW 0.85x reducer/flattener (see FLO for more details)
Aluminium Carrying / Shipping Case
The RRP is over £720, so grab a bargain while you can.
Collection from Nottingham, or DHL for £20 (within UK)
Hi guys, it's my first post here, so Hello!
My synscan goto upgrade started to act like in this video of mine SynScan GOTO Skipping after being disassembled for few weeks in the closet. There were no such problems before.
When it slews at rates above x3 everything is fine and smooth but as soon as it starts tracking at x3, it skips steps or something like that.
My setup is eq3-2 on alu and SW 150/750 with Canon 700D attached.
Thanks in advance for any clues or ideas!
By A McEwan
Selling some accessories. A couple of Meade DS 4000 Super Plossls, 9.7mm and 26mm. Both in bolt cases and in great condition.
£15 each or £25 for the pair.
Skywatcher 6x30 finderscope with caps and mount. Some scuff marks on the mount foot, as to be expected. Optics nice and clean.
Postage at cost.