Recently Browsing 0 members
No registered users viewing this page.
This may be an artifact, but I took this shot of the Orion Constellation from the Canary Islands and it showed a small nebula around Beteleguse. Do you think this is real? The shot was taken with a dual band filter which brings out the Ha. I initially assumed it was a camera artifact, but I took more shots with different camera positions and it was still there. There are some on-line articles about such a nebula. My first reaction was to edit it out, but I think it might be real and only visible because Beteleguse has dimmed by over 50%. What do you think?
IC4604 in LRGB Filters. Taking for Namibia during my visit in June 2019. This beautiful nebula is part of the rho Ophiuchi colorful cloud, i the center a 3 blue bright stars the reflect the blue light on the nebula.
Lum - 20 x 5min = 100min
RGB - 5x5min for each channel at BIN2, 75min
Total Exposure: 175Min (~3 Hours)
Telescope: ASA 12'' F3.6
Mount: DDM 85 Unguided
Camera: FLI 16200 Mono
Thanks for watching,
My Flicker Page: https://www.flickr.com/photos/101543943@N04/
My first image of M76 A bit rushed as clear nights are a rarity now
30x120s Bin 2 Luminance ,SW 102 , ZWO 183MM Pro , OVL field flattener ,guided , processed in Gimp
Took some Ha as well but poor results for some reason
Seems an Oiii filter may have brought out some more detail
i know its not great but just chuffed to have imaged it
This has been a bit of a project. Last year I worked out that my 200mm Canon F2.8 lens and ASI1600 would frame the whole of the Veil complex quite nicely. I captured Ha and OIII data for the east and west nebulae with a Tak FSQ 106 and added this into the widefield image. Although the Tak data had to be shrunk down it did add a bit of extra resolution where it was needed.
The difficulty for me has been the processing. I have found it really difficult to tease out the faint wisps of detail and have tried the usual routines of micro contrast adjustments using curves along with Scott Rosen's Screen blend/mask inversion method but the results weren't great owing to the close proximity of faint and bright nebulosity. I'd heard about the PI process tool for removing stars, Starnet, so loaded this and had a rare foray into PI. This proved very helpful. It was a luminence created from Ha and OIII using the 200mm lens with the Tak data mixed in. Then the starless layer was added in PS with the screen blend mode at 50% opacity. The nebulosity detail was so well preserved I didn't need a mask. After blending I reduced the stars a bit more using the starless layer again and darken as the blend at 50%. I should really unleash some of the stars to add a bit of "punch" but I've wrestled with this data enough for now! I plan to use it further as I look deeper into the Gorgon that is PixInsight!
Telescope: Tak 106 for E and W veils. Canon 200mmL lens
Camera: ZWO ASI 1600 pro mono cmos, Gain 150, offset 50
Filters: Baader 7nm OIII and Ha
E+W Veil 10x30 mins each channel for each nebula. Whole complex 50x5mins for each channel
Captured with SGP, calibrated, aligned and combined with PI, processed mainly with PS but PI for Starnet. Ha mapped to red and OIII to both blue and green