Jump to content

Stargazers Lounge Uses Cookies

Like most websites, SGL uses cookies in order to deliver a secure, personalised service, to provide social media functions and to analyse our traffic. Continued use of SGL indicates your acceptance of our cookie policy.

Bruno Marin

Doubt about paylod and counterweight - AZEG6 GT -

Recommended Posts

 I found this setup in internet and make me think, with AZEQ6 GT and 2 scopes, different weights and size, without counterweight in AZ mode! 

- I can put a MAK100mm 3kg +- and a OO VX10l  12kg +- without counterweight?

 

Does anyone have this setup mount and already used without counterweight with two telescopes of different weights? Is it really necessary to have a balance using in AZ mode?

The problem to centralize the object with both scopes is true? With the SW AZEQ6 GT?

Follow the images

a TSA-120 with 6.5 kg i think and the other with 22kg i forgot the brand hehe you can help me?

 

images (1).jpeg

images.jpeg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By The-MathMog
      Because of the current situation, I have, as many of you guys probably have too, spend a lot more time under the stars when possible.

      It has literally been over a year since last I was out doing some astrophotography because of work.

      So here is my second take after the long break, NGC 3344 (The Sliced Onion Galaxy).
      Initially I thought it would be a lot fainter than it was, so it was basically a shot in the dark, of just trying to get back at doing this.
      But the final image actually showed a lot more detail than I would've hoped for!
      Spring lent a lot of clear night, but those seems to be gone already. I would've hoped for a few more hours to add some more luminance data to it, as I did have to push it quite a bit.
      I am not too happy with the shape of the stars either. Guiding was not very stable through the night, even though balance and polar alignment seemed to be good. Might need to update my Celestron PEC data? 

      Any advice or feedback is very welcome! 🤩
      NGC 3344 (Sliced Onion Galaxy)
      _______________________
      Image:
      Luminance - 13x16 min
      RGB - 2x16 min each
      Flat and Dark calibrated
      Gain 111
      Offset 40
      Total Integration - 5 Hours 4 minutes  (LRGB)
      _____________________
      Gear Used:
      Skywatcher 150PDS
      Celestron AVX Mount
      ZWO ASI 183MM-Pro
      Baader 2'' Neodymium Filter
      Baader 1,25'' RGB Filters
      ZWO Mini EFW
      Explore Scientific Coma Corrector
      ToupTek Camera G-1200-KMB Mono Guider
      Orion Mini 50mm Guidescope
      ______________________
      Software:
      Sharpcap
      PHD 2
      Photoshop CS2
      Deep Sky Stacker
      Stellarium/Stellarium Scope
      Astrotortilla

    • By ThadeusB
      if you have a 1.8kg EQ3/EQ5 counterweight you don't want, I would like to buy it off you.
      I can collect if you are not too far from me.
       
      Thanks.
    • By merlin100
      I'm tempted to go down the route of getting myself a brand new reflector...  My friend's old Meade 114/900 is a good telescope, but I want something of my own and with a bit more light gathering power.  To this end, I've been looking at a couple of different models and manufactures.  
      https://www.firstlightoptics.com/beginner-telescopes/skywatcher-explorer-130.html
      https://www.firstlightoptics.com/beginner-telescopes/skywatcher-explorer-130p.html
      https://www.firstlightoptics.com/reflectors/skywatcher-explorer-130m.html
      https://www.amazon.co.uk/Meade-Instruments-Polaris-Reflector-Telescope/dp/B01FG8JEGG
      I must admit, the Skywatcher Explorer 130M floats my boat, as it's motorised with a speed controller.
      Any thoughts or observations?🤔
    • By stevebb
      Celestron C8 XLT + extras and SkyWatcher Star Travel 80 (ST80)
      I have a Celestron C8 with XLT Starbrite coatings. Will include the full length base plate, both visual and imaging backs, scope rings, front 8" end cap and the finder scope with it. No box I'm afraid. Optics are good and clean, focal length is huge - 2300mm from memory. This lot would cost close to £1300 new and one with less spec went for £750 on fleabay recently. Might be interested in a part exchange or will let it go for £450 collection only.
      Also, I have a SkyWatcher Star Traveler 80 - good optics, used as a guide scope - just the scope itself (does not include the barlow in the photo) - now including dovetail bar and scope rings looking at around £50 for it.
      I have decided to save up for another refractor, WO, Equinox or even toward an Esprit. However, I would also consider p/ex for an Intel NUC and/or Pegasus Astro Pocket Powerbox.
      Please excuse some of the colours - I used my astro modded 6D which was in the observatory so the "nice" purple is actually black !!
      Both these are collection only.




    • By Clear Skies!
      I am going to buy Skywatcher EQ5 Pro Go-To mount. But, unfortunately, I am low on budget.
      So, does someone know where can I buy the cheapest EQ5 pro mount?
      Yesterday there was a low price for it (350 €), but they changed it.
      Thank you for your time!
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.