Jump to content

Stargazers Lounge Uses Cookies

Like most websites, SGL uses cookies in order to deliver a secure, personalised service, to provide social media functions and to analyse our traffic. Continued use of SGL indicates your acceptance of our cookie policy.

sgl_imaging_challenge_banner_dslr_mirrorlesss_winners.thumb.jpg.9deb4a8db27e7485a7bb99d98667c94e.jpg

muddy

COMPLETED - SOLD --Sky Watcher HEQ5pro tripod and extension pillar

Recommended Posts

SOLD

Skywatcher HEQ5PRO Tripod and Extension pillar.

There are a few marks on the tripod legs but not really noticable, the eyepioece/spreader tray has paint flaking off

But could be cleaned and repainted, it didnt bother me, but I am lazy.

I am selling as its not getting used as it should be and I find I use the excuse that it takes to long to carry it out 
and setup, but in reality I think I am just losing interest.

As it is a heavy object collection from TS25 (Hartlepool) is preferred.
But if a courier collection service is available buyer pays the costs and arranges pickup I am happy as long as money has been transfered. Also I am prepared to travel a reasonable distance to meet for exchange.

Price £400 ONO I will not split

 

SALE COMPLETED

DSCN2900.JPG

DSCN2901.JPG

DSCN2902.JPG

DSCN2903.JPG

DSCN2904.JPG

DSCN2905.JPG

DSCN2906.JPG

Edited by muddy
SOLD

Share this post


Link to post
Share on other sites

Pm sent, Can pop over today

steve

stockton

Edited by bilbo

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Michael Hogan
      I have decided to sell my Cem-120 mount as i got a second hand AP 1100 GTO from my friend who got a new AP 1600 with encoders
      its just under a year old bought from Altair Astro so still under two year warranty is in mint cont i couldn't miss the opportunity to get
      AP 1100 GTO and let it go still waiting for pier plate for mount.
      So theirs no point in keeping two large mounts after i got my dream final mount buyer will pay shipping price is 2150 pounds.
      Altair Astro price without Ipolar Camera is 3250 pounds without Ipolar Camera which is 200 pounds total 3450 pounds
       

    • By SimM
      Setting up my new HEQ5. The same issues are present (by design) on RA setting circles on the other mounts?
      Instructions missing for RA setting circle thumbscrew
      Can the RA setting circle actually be used as a normal setting circle - it seems just "cosmetic". It's either locked or slips when free to rotate.
      Simon
    • By teoria_del_big_bang
      I had a plan, very simply my HEQ5 was at it's payload limit so needed to upgrade. Part of the upgrade would naturally mean parting with the HEQ5 to regain some much needed cash (Bought this as my Christmas Present now Boiler playing up and really needs replacing not repairing yet again).
      I received my CEM60 with Tri-Pier from FLO as usual within just over 24 hours and had a play with it and love it.
      So time came today to dismantle my old friend and put it up for sale in the usual places.
      BUT, I cannot believe how sad I felt when dismantling it 😞 . I feel such a silly so and so but I feel sort of some attachment to this inanimate object. Only had it just over 2 years but have replaced all the bearings (even though when I striped it down I do not think they were required), added the Rowan Belt modification, spent ages tweaking the backlash out of it the best I could, and when I needed a Losmandy saddle upgraded the original saddle to a dual load saddle.
      Now although sense tells me to sell it as planned I am now wondering whether to keep it in case I ever start to do some imaging other than on my patio. It seems to make no senseas I will probably not use very often but I am a bit of a hoarder anyway and really struggle to part with anything I think will be useful one day (my garage is testimony to this fact 🙂 ).
      I guess the sensible thing is at some stage getting a more light-weight tripod for the CEM60 as the weight difference is not that much to make the HEQ5 any better then the CEM60 for travelling and keeping two setups on APT for each mount may lead to mistakes being made.
      Steve

    • By SimM
      I want to get a GOTO mount for my newtonian scope. Originally I looked at a bigger Sky-Watcher EQ6 mount but I'm now thinking something smaller would be best. Otherwise it may be a bit too heavy to take out into the garden for me, so I'm looking at the EQ5 series and the HEQ5 Pro looks to be very good. I've compared it to the Celestron Advance VX which is priced about the same and like the specs for the Sky-Watcher.
      Some questions, before I buy a new HEQ5 Pro in the UK - I think the spec has changed very slightly as changes get rolled out:
      1. Is the supplied SynScan HC a V4 e.g. star base of 40,000+ objects e.g. used by all the other Sky-Watcher mounts, it has been described as 13,000+ which may be a typo in the on-line literature? For me a few 100 would be OK...
      2. Is the polar alignment scope built in (included) and does it have red (adjustable) illumination of the reticle controlled by the HC?
      3. Is there a D Type connector or is it now USB e.g. to control/update HC?
      4. For visual use, is a 10kg scope within it's workable capacity?
      5. Is there a supplied Vixen (green) dove bar included in the box? It comes with 4 bolts to attach a scopes rings? I'm assuming it's not possible to use a Losmandy (wide) dovetail saddle e.g. only a (narrow) Vixen mount e.g. it doesn't allow for both types?
      6. Discussion about a PSU suggests Halfords 17A car charger @ £50 is a good way to remotely power it?
      7. Can it also be used for "casual" astrophotography as well as visual e.g. reasonable tracking?
      8. Is there anything not to like about it or that you should be aware of before buying?
      Thanks
      Simon 
       
    • By GTom
      I am thinking on astrophotography with a reinforced/DIY upgraded 16" travel Dob, 3-5minutes subs. Seen that the Tom O' dual axis platform does exactly that but got two problems with that:
      #1, price: costs more than a GEM capable to carry a 16" Newtonian (CEM60). I know there are stronger, more expensive mounts out there - anyway, 2000$+ is beyond my budget.
      #2, fixed latitude. The scope is a travel Dob which I intend to fly e.g. to Namibia - unfortunately I don't live South enough to be on its Northerly counterpart. Neither I want to pay TWICE the $2k+ price tag.
      #3, polar alignment: no polar finder, better PoleMaster no deal. In 2020 the maximum time I want to waste with PA is 5 minutes. I have two trackers meant to be used with small telepoto/standard lemses: both came with polar finders.
      Any recommendations? I am also open for DIY, however need a decent low-latitude design first.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.