Jump to content

Stargazers Lounge Uses Cookies

Like most websites, SGL uses cookies in order to deliver a secure, personalised service, to provide social media functions and to analyse our traffic. Continued use of SGL indicates your acceptance of our cookie policy.

stargazine_ep25_banner.thumb.jpg.9e57eee22cad68fd6b67a87befeaa79b.jpg

Grigs

Hello Guys, New To The Forum.

Recommended Posts

Just thought I would say hi to everyone. 

I am a Noob, but have been googling astronomy for past year, so am familiar with some of the lighter terminology.  

Most of my googles have directed me to this site, so I have already read forum posts here numerous times.

Have already acquired quite a bit of kit, but just not found the time to try it out yet. 

This should hopefully change soon as I am expecting to have a lot more spare time in a couple of months. 

Being in the Midlands in the UK, I am not currently missing much, due to the current cloudy weather here. 

I am looking forward to picking your brains and in time posting some of my experiences here. 

Kindest regards, 

Geo.

 

Share this post


Link to post
Share on other sites

Welcome. I hope you have lots of fun. 🙂

  • Like 1

Share this post


Link to post
Share on other sites

Hi Geo, welcome to this great forum. Feel free to ask any questions, there will always be someone who can answer them. ( Though maybe not me... ):smiley:

  • Like 1

Share this post


Link to post
Share on other sites

Thank you Guys, for all your warm words. 

Much appreciated. 

Geo :)

Share this post


Link to post
Share on other sites

Geo

Welcomes to Land Down Under

You travel the universe in this forum

John

 

PS

 

Early next year, NASA is sending another Rover to Mars

The attached link with enable you to register your name, and have included on the Rover, and also download Boarding Pass

https://mars.nasa.gov/news/8440/nasa-invites-public-to-submit-names-to-fly-aboard-next-mars-rover/

 

 

Share this post


Link to post
Share on other sites

Howdy Geo from across the pond! You're taking steps into the greatest hobby ever and have joined a great forum! Plenty of friendly folks here to answer questions from general astronomy to observation techniques to astrophysics! Plenty of "branes" to pick here!

Rob

Share this post


Link to post
Share on other sites
1 hour ago, Kn4fty said:

Howdy Geo from across the pond! You're taking steps into the greatest hobby ever and have joined a great forum! Plenty of friendly folks here to answer questions from general astronomy to observation techniques to astrophysics! Plenty of "branes" to pick here!

Rob

 

Rob

Which pond

Thought was across the Ditch

Have fun weekend

John

 

  • Haha 1

Share this post


Link to post
Share on other sites
2 minutes ago, cletrac1922 said:

 

Rob

Which pond

Thought was across the Ditch

Have fun weekend

John

 

The big pond called Atlantic 😂😂😂😂😂

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Zermelo
      The focuser on my SkyWatcher 150i is a basic rack-and-pinion, unsurprising for the price point, but sometimes a bit of a pain to control finely enough. I’m not looking to spend any serious money upgrading it, but I did want to see what I could tweak.

      The first thing I did was to slacken off (slightly) the screws holding the plate against the spindle, as the operation was very tight when new – that helped a bit (and I think that without doing this first, the “friction fit” approach described below wouldn’t have worked). I will eventually get around to taking it all off as per AstroBaby's tune-up.

      Improving the fine control without a major change means doing something with the focusing knobs – they’re quite small, so the effective “gearing ratio” when you operate them is on the harsh side. Some folk have described fitting larger diameter replacements, either bought or made, and even using ones with a planetary-style mechanism to achieve a reduction in the ratio. I didn’t fancy this, as I couldn’t see how the existing knobs were attached to the spindle without trying to prise them apart (possibly terminally). The other option is to increase the effective diameter of the existing knobs, for which purpose a clothes peg is apparently quite popular, but I’ve also come across descriptions of chop sticks inserted into holes drilled at intervals into the circumference, and punctured lids from peanut butter jars.

      I wanted something that was cheap, relatively tidy and non-destructive. The answer seemed to be some sort of thick sleeve that I could fit over the knob. It would need to be a tight fit so as not to slip in use, to be not so large as to foul against either the focuser tube or the main OTA, and to be thick enough that it didn’t flex sideways when grasped. I thought I might find some larger rubber washers that would do the job, but none were thick enough to be rigid in use. However, a bit of searching found these spacers that are apparently used in vehicle shock absorbers.

      My calipers said the diameter of the focuser knobs was around 29.5mm, and the nearest spacers that were available had an internal hole 30mm and outside diameter 60mm. I ordered one that was 10mm thick, not quite as deep as the knobs, but which allowed a bit more space on the inside edge for free operation. I’d hoped the internal hole might be a but undersized when it arrived but it was spot on, so I wound five or six turns of masking tape around the knob first. To avoid taking the tape off when fitting the spacer, I positioned one side first and stretched it across the face as I pushed. When it’s flush with the knob’s outer face, it’s just clear of the focuser body and OTA. There might be enough room to stick some kind of friction surface around the outside to improve the grip, but I don’t think it’s going to be necessary.

      I decided to do only the one knob, so I now have a very Noddy “dual speed” affair.  Because the clearances around the fitted spacer are quite tight, it’s worth checking the positioning of the spindle in the focuser body first – mine was fractionally off centre, so there was more room one side than the other (assuming you have no preference).



       



       

       
       
       
       
       
    • By KateSheff
      Hiya, 
      I'm planning on getting a telescope for my son for Christmas (he'll be 6 by then). I want it to have some lasting potential and would rsther get a decent ish one so he can actually see things more clearly and retain his interest, although obv don't want to spend a fortune. However, we don't have a car, so in terms of opportunities to take advantage of dark skies, it would need to be portable. I was all set on the Skywatcher Heritage 150p and it seemed to tick so many boxes, and it kept getting tagged as very portable and great for travel, but I just noticed the weight is 7.5kg... so it may be portable compared to bigger ones, but I'm not sure about lugging it, a whole load of camping gear and two kids on a bus and a train! 
      Does anyone have any recommendations for anything similar spec-wise, where you can collimate both ends etc, that's also an easy set up and that's just a bit more lightweight?
      Thanks,
      Kate
    • By Matteoconti1292
      Hi to everyone, 
      I'm new in the world of the telescope and as my first telescope I bought an used Skywatcher 70/700 with supatrak mount and I hope that someone can help to understand the equipment I'll need to connect (cable, bluetooth or wi-fi add) my telescope mount to a Mac and control it by software like EQMac or Stellarium.
      Thanks
    • By Sidecontrol
      Hi Everyone,
       
      Not posted some images since my introduction in the welcome section.  With the dark nights finally back here in Scotland I thought Id share some of the DSOs I managed to capture back in Feb-April just before the light nights rolled in at the start of May.
       
      These were all stacked and edited in PixInsight.  
      1.  The Running Man and Orion Nebula - less than an hour of integration time (SA pro + fuji 55-200mm lens).
      2. Bodes and Cigar Galaxy - Less than an hour of integration time ( SA pro + SW 72 ED telescope). 
      3. Flame, Horsehead, Running Man and Orion Nebula - Less than an hour of integration time (SA pro + fuji 55-200mm lens).
      4. Pinwheel Galaxy - 35 mins integration time (SA pro + SW 72 ED telescope).
      5  Whirlpool Galaxy - 21 mins integration time (SA pro + SW 72 ED telescope). 
      6.  Andromeda Galaxy - 1.5 minutes integration time (Move Shoot Move + fuji 55-200mm lens).  
       






    • By AstroRookie
      Hello,
      I took a shot of M13 as a first test of my new orion 8 f/3.9. I have a couple of questions about the final result.
      Equipment list:
      orion 8 f/3.9 mount skywatcher eq6r-pro canon 500d - astro-modded by me 40 exposures of 90 seconds and 40 darks 200 bias 200 flats capture software: nebulosity4 guide camera: zwo asi120mm guide scope: svbony 20 (80mm - 400mm) guide software: phd2 Processing:
      siril preprocessing: align/callibrate/stack) siril post-processing: green nois reduction/ photometric noise reduction (very cool!)/deconvolution Result:
      I attached a screenshot of siril (as the tif or jpg export did not show these "problems")
      My questions:
      after preprocessing, I still have 2 problems (see the marked areas); what can be the cause of that? Are my flats not "correct"? The big mark, is a spot on the sensor, that is the "collateral damage" of me removing the Ir-cut filter. The other mark must be an other issue, I don't know so far the right part of the picture, shows some sort of glow; there was no moon during capturing; I live in a bortle class 5 area, but street lights are dimmed after midnight, till 05:00am and shots were taken around 01:00am. what can cause this glow Other remarks are very welcome - I hope to learn from it.
      Thanks in advance,
      AstroRookie

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.