Recently Browsing 0 members
No registered users viewing this page.
I bought my first telescope, SW 150pds about 6 months ago with the purpose of astroimaging "when i feel ready". So far ive used my Nikon D810 for that, and I'm now planning on taking the step buying my first AP camera.
My targets would be DSO's, and not planetary. I want a mono-camera, not color.
I want to get away with a very good camera to a reasonable price (wouldn't we all...) and in this regard I've been drooling on the ZWO ASI 1600MM Mono for some time. The price for it is in the upper part of my budget, but I'm willing to if its worth it. I've seen from other treads that sensor-size isn't everything, and dynamic range and gain and all is just as important, but i have trouble understanding it all 100% when it's all new to me, but in my experience i am a practical person who learns things much better and faster with the gear in my hand. So without getting to technical, and staying as objective as possible - please help me with;
1. Is this a good camera to go for?
2. It's sold with options of filters 1.25", 31mm or 36mm - Why these options, and what determines what i would choose?
3. Would you go for another camera in this price range, and why? - Or to rephrase it a bit; If you were in my shoes, which camera would you og for?
I'd appreciate any help:)
I might add, that i understand that with my lack of experience, buying a mono-camera with filters and all might seem premature, but for some strange reason. I enjoy these "way over my head"-projects and figuring out things as time goes - I just need some guiding in the right direction.
Hiya, have absolutely no idea where to begin finding a camera for Astrophotography. And by that I mean - I know I want a canon but am unsure which to buy. It will be a second hand one. Does it need to be full frame ? Can any and all models be modified ? Is a higher pixel count the way to go ? What are the important things to look for in a DSLR ?
any help would be great.
I have guiding problem with the following guider setup: 9x50 finder + ZWO ASI 120mm mini + PHD2.
The imaging scope is a 6' newtonian + canon dslr on a HEQ5, driven by a laptop via diy EQDIR cable.
When the mount is set up and running correctly, polar aligned and all... I connect the guider camera
and mount with phd2. All nice and easy, I run a calibration, then it starts to guide. All seems ok.
Then I am starting to take pictures. The first seems OK, then the second have the star trails...
I check phd2 and there is a message: the camera (ASI) did not take a picture for "xy" seconds so it is disconnected.
Grrr.... I reconnect try to set up a longer period for "xy" in the settings as mentioned in the message.
And all the same again and again. Whatever I add for connection timeout for the camera, it just reaches that
and disconnect the camera.
PHD + philips toucam has worked for me flowlessly. I changed to PHD2 because I gave myself a birthday present,
the little ZWO camera. (and PHD did not recognize it)
Do you have any idea what can be the problem? I will contact PHD2 help also, but maybe somebody had already
the same problem and figured out how to overcome. I am almost sure I make some dumb mistake in the PHD2
software settings, however I tried to change only what was needed.
By Mandy D
I've just bought a Daystar Solar Scout 60mm DS for H-alpha imaging of the Sun. I am now looking for a suitable camera to use with it. I know I could use my DSLR, but for H-alpha that is not going to give best results, so am looking for a dedicated monochrome imaging camera. I have identified the ZWO ASI178MM as a possibility that fits my budget and has a large enough (I think) sensor to image the entire Solar disc if I use a 0.5 focal reducer which will give me a total focal length of 465 mm.
Does anyone have any experience of this camera in this application, or know if it will be suitable? I know it does not have an IR blocking filter, which I understand is an advantage for H-alpha. The spec is available here:
Hi, this question has probably been done to death here, but can I ask the community to help me decide on a new camera?
After struggling with my very glitchy QHY5LIIc camera for a while, as well as having a forced break from astronomy, I have decided to get a new camera. After all the problems I've been having with the QHY, I really don't want to use this manufacturer again. I know lots of people use them quite happily, but once bitten ...
I have been looking at the ZWO cameras - OSC, as I haven't the time, clear skies, or patients to do LRGB imaging!
I have about £250 to spend, which I may be able to push to £300 if I wait a bit. ? So I've been looking at the ASI224MC, ASI290MC and the ASI178MC cameras.
I mainly do planetary/Luna imaging, but I have also dabbled in a bit of DSO and would like to continue with both. I have a C9.25 and a ST80 guide scope. I know these aren't ideal for DSOs but please humour me!
I think from the specs/information that the 224 is probably the best option. Although the resolution and QE are the worst of the three, the well depth and read noise are the best and the fps is pretty good too.
I don't know if there are better/cheaper cameras using the same chips, such as Altair's range. I just don't want to make the same mistake that I did with the QHY!n
Any help/advice you can give will be much appreciated.?