Synscan Hand Controller V3 Connecting Cable

[ZiHao]

Synscan HC are connected to the EQ3 pro mount using a RJ45 to RJ45 connecting cable according the the manual, and unfortunately I lost it therefore would like to make one myself (no previous experience of 'cables,wires work', plus it is pretty difficult to find the original one ( spiral type ) on the internet, and is rather expensive ), please bear with my ignorance. Any help or advice would be greatly appreciated.

To start with, I'm gonna get one of those CAT5e/CAT6 ethernet cables (either one of them will work the same right, I guess?), and two RJ45 connectors, crimping tool. There will be a specific color arrangement of cables i think, anyone can please provide the color coding as a reference, thanks a lot. So, after some plannings, is this workable with a synscan HC ? I don't wanna blow up the HC because of using the wrong cables...Thanks again.

Clear Skies!

[Dr_Ju_ju]

A standard Cat5\6 cable will work fine, so just use the default colour coding of orange-white, orange, green-white, blue, blue-white....  see https://www.lanshack.com/make-cat5e.aspx