QHY8L Cable Retainer Clip

[A320Flyer]

Hi

Does anyone have the STL file for this?

I know that QHY did make this available for download but I can be darned if I can find it now. 

Thanks

Bill

 

 

 

 

[teoria_del_big_bang]

Bill,

I can't find it either, I suspect it has been removed as maybe they want to sell spares or a partner of theirs is selling them. It definitely was on their site as I can find a link but the link doesn't work anymore.

Do you have a printer?

The clamp looks a fairly simple item to print, preferably from PETG  or ABS I would think.

If you struggle to get a replacement you can send me a drawing of it with all dimensions and could make a STL file pretty quick, or even print you one, I am only down the road from you.

PM me if you are struggling ?

Steve 

[Dr_Ju_ju]

Ask Bernard @ Modern Astronomy, as he may have a better idea of where to source the STL file.

[Chriske]

Got one, hold on, I have to find it first. It is tiny. I use it for very small tie-wraps.

[Chriske]

This is the Inventor file, I'll convert it to STL

wire-support-3.ipt

[Chriske]

STL file

wire-support-3.stl

[A320Flyer]

Hi guys,

Thanks for all your responses.

This is the clip in question:

I have a 3d printer so was looking to print one off. As a Scot who has lived in Yorkshire for most of my life, I'm very reluctant to spend £18 on a tiny bit of plastic that should have been included with the camera in the first place.

I've tried Bern but he does not have the file, as he now sells the clip!

I'll keep looking.

Ta.

Bill

 

[Chriske]

I use them all the time. With a few friends busy building a few printers this very moment.  So we need 'tons' of these things. They're very small but can hold very thick cables.

 

[Exi]

Hi,

this one?

Best Regards and CS

Andreas

 

8PROusb-1.STL

[A320Flyer]

Hi Andreas

Many thanks.

Bill