Jump to content

sgl_imaging_challenge_2021_annual.thumb.jpg.3fc34f695a81b16210333189a3162ac7.jpg

Recommended Posts

Totality of the Longest duration total lunar eclipse of the century. While this is just one image, given that Bangalore was completely clouded out, or rather, my location was completely clouded out, I had previously planned to put the mount and scope on tracking, so that even if there was a break in the clouds for a few seconds, I should be able to capture the moment. The shot below was taken through hazy conditions, but given that the conditions were such, I am happy with the outcome. The next eclipse is due to occur on 21st  Jan 2019(?). I shall be better prepared. 
Scope: Orion 80ED with Orion Field Flattener
Mount: Sky-Watcher HEQ5 PRO
Exposure: o.5s
ISO: 6400
Camera: Canon 550D

Location: Bangalore, India

LunarEclipse27072018webcopy.jpg

  • Like 13
Link to post
Share on other sites
16 minutes ago, astrosathya said:

The next eclipse is due to occur on 21st  Jan 2019(?)

Yes, but unfortunately that one will only be a partial eclipse.

  • Like 1
Link to post
Share on other sites
On 28/07/2018 at 06:37, MarsG76 said:

Yes, but unfortunately that one will only be a partial eclipse.

Not in the UK. I think its another total, obviously it will be wind, rain, snow, sleet, hail and any else other than clear skies ?

  • Thanks 1
Link to post
Share on other sites
1 hour ago, Pete Presland said:

Not in the UK. I think its another total, obviously it will be wind, rain, snow, sleet, hail and any else other than clear skies ?

Think positive... otherwise you will summon everything but clear skies.

  • Haha 2
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Stargazer33
      Mare Fecunditatis and crater Langrenus. Saturation has been increased to show the different surface material/colours.
      C9.25; CGEM; ASI385MC; Baader Neodymium filter.

    • By Adaaam75
      Just a quickie,
      I took a shed load of images last night of the moon using my DSLR on my scope with the intention to stitch using Microsoft ICE but its been pulled!
      Any free software suggestions for image stitching (not stacking)?
    • By Cobberwebb
      Hi everyone.
      Looks like I will get some favourable weather in the coming days, but the moon is out and full. I finally have a car so I can get away from light polluted Weymouth, and tonight I took a drive and found a great spot to shoot (see image).
      So to the point, I want to shoot Andromeda during these moonlit nights since the moon will be directly behind me. How much will it still affect my images?
      I'm still a beginner, using a Nikon Z50 and the 50-250mm kit lens @250 (F6.3), but I do have a Star Adventurer now, so I'll go out and shoot if nothing for the practice (my polar alignments have been pretty good).

    • By guydive
      Hey all,
      I'm considering the 250PDS. The main use is visual, and the second is EAA (I currently use a zwo183mm). 
      What I'm hesitant about is the primary focus. since It's mostly for visual, I'm wondering on how much back focus it has compared to the standard Skywatcher 10" dobsonians? with the standard dobsonias with the same optics and focuser you already need an extension tube for most eyepieces...
      Also, there's probably a "bigger" obstruction (bigger shadow on primary)? 
    • By AngHor
      I have a SkyWatcher AZ-EQ5 mount. It’s all working fine, except I have an issue with alignment. This applies whether I’m in EQ or Alt-Az mode.
      I set it up using  one or two star align without problems.
      However if I use the handset to GoTo another object, I usually need to do fine tuning adjustments to centre on the new object. But the mount disregards these adjustments, so if I use the GoTo system to centre on a nearby object, or revisit the original object a second time, it’s still off by the same amount.
      How do I tell the mount that I have centred on the new object and that it should now be aligned with that object ? 
      My iOptron MiniTower has a feature that does exactly this – once set up correctly and aligned, for each new object I go to there is an “ALIGN” option, and if I use this it now knows the correct position. Can I do this with SkyWatcher and Synscan ?
      Thanks. Angelo
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.