Jump to content

Stargazers Lounge Uses Cookies

Like most websites, SGL uses cookies in order to deliver a secure, personalised service, to provide social media functions and to analyse our traffic. Continued use of SGL indicates your acceptance of our cookie policy.

sgl_imaging_challenge_celestial_motion.thumb.jpg.a9e9349c45f96ed7928eb32f1baf76ed.jpg

arkosg

SLL and SX Trius 694 / Filter Wheel - summer objects

Recommended Posts

Hello everyone,

After a bit of a hiatus, I was able to get out again and enjoy new moon/clear skies from a slightly less light-polluted viewing location. ?

For those who have seen my past posts, I'm still using StarLight Live 3.3 with a SX Trius 694 camera, now with SX filter wheel.  I alternate between using an 8" SCT and various Borg refractors - these shots are with a 5" Borg, with exposures < 30 s.  The combination works well, overall, and SLL controls the filter wheel which makes jumping between L,R,G,B and Halpha filters really easy and fun!  The only major issues I have are that (on my Mac) SLL seems unable to run the Trius in anything other than 2x2 binning.  I haven't been able to get a PC to test whether this is only a Mac related issue, though others have apparently been able to use this camera in all the various binning modes via SLL windows.  I also have focus/framing problems if exposure time is set to 1s (camera drops out and SLL freezes up).  To facilitate not having to refocus, everything was shot through either an L filter, R+G+B filters, or Halpha filter (all Astronomik 1.25", in a single filter wheel).  It generally worked really well, but occasionally I would switch colour filters to do a composite and SLL would stop stacking and I've had to start my colour composite from the start again.  But a fantastic feature of SLL!

Enjoy the shots - these (and others not posted) were all taken over a few hours time in the early morning.  I love how much - and how quickly! - you can view with EAA!

Cheers,

Greg A

Trifid.M20_2018.7.13_01_26.42_3.jpg.7fff65767445fd301026572501d6bcee.jpgTrifid.M20_2018.7.13_01_12.46_3.jpg.f9bd873fbf1c8fd9ace63e6d9f9d5e17.jpgOmega_Neb.M17_2018.7.13_01_59.02_3.jpg.55d0eca8d38ba0f93ae25367ad6c4364.jpgNGC_7331.Stephan.s.Quintet_2018.7.13_03_44.24_3.jpg.e73aeceab9290c3891db346b7c91b402.jpgM57_2018.7.13_02_55.32_2.jpg.83bcd1dd089c41cfc6cb39fba3c58cce.jpgM51_2018.7.13_02_48.07_3.jpg.47e6ae4b760002ba3edb7eb230efa15a.jpgLagoon_M8.Halpha_2018.7.13_00_57.56_3.jpg.656150efa4c09aef4f2c84990d0669d3.jpgLagoon.M8_2018.7.13_01_03.44_3.jpg.1887657a4854c864032b921cbdb0f898.jpgLagoon.M8_2018.7.13_00_54.14_3.jpg.3d1a17370265e115532acb3f9ca7a029.jpgEastern_Veil.Halpha_2018.7.13_03_29.25_3.jpg.e121d6ee20b8cd283f76bf7da5b44b6c.jpgEagle_Neb_M16.Halpha_2018.7.13_02_09.03_3.jpg.543629439506c1cdb34359aa0e9e945e.jpgEagle_Neb.M16_2018.7.13_02_05.10_3.jpg.9cc20c9ff2e08cd7f3391f5ad611b0a6.jpgCrescent.Nebula.Halpha_2018.7.13_03_04.10_3.jpg.4db6499a11da158026d78484dd63c52a.jpg

  • Like 12
  • Thanks 1

Share this post


Link to post
Share on other sites

So a follow up.  Got out a second time in a week (!), this time with a smaller 3" Borg refractor, same mount/camera/filters.  Some slightly longer exposures, but still all under 1 minute, and typically less than a half a dozen images to a stack.  The skies at this location were perhaps a little darker, but more humid conditions.  A lot of the shots were Halpha images this time 'round.  Enjoy!

Greg

 

 

California.Neb.Halpha_2018.7.15_03.14.43_3.jpg

Central.Western.Veil.Neb.Halpha_2018.7.15_01.41.21_3.jpg

Elephant.Trunk.Neb.Halpha_2018.7.15_02.51.03_3.jpg

Gamma.Cygni.Neb.Halpha_2018.7.15_02.40.21_3.jpg

M31.Andromeda.Gx._2018.7.15_03.41.15_3.jpg

North.America.Halpha_2018.7.15_02.30.59_3.jpg

Pelican.Neb.Halpha_2018.7.15_02.24.36_3.jpg

Soul.Neb.Halpha_2018.7.15_03.00.47_3.jpg

M8.Lagoon.M20.Trifid_2018.7.15_00.47.36.jpg

M8.Lagoon.M20.Trifid.Halpha_2018.7.15_01.01.17_3.jpg

M8.Lagoon.M20.Trifid.L_2018.7.15_00.40.45_3.jpg

  • Like 9
  • Thanks 1

Share this post


Link to post
Share on other sites

Hi Greg

Good to see you here again. I think its been a slow year for many of us... You're getting some excellent results with the Trius. I love the FOV, especially with the 3" Borg (e.g. fitting M31 in a single field). I have a 77mm Borg that I bought for EAA but have been having so much fun with my 8" Newt that I haven't fully got round to testing it, but your results have inspired me to have a go at the next opportunity (although with my Lodestar the FOV won't quite be so impressive).

Martin

Share this post


Link to post
Share on other sites

Somehow missed these, fantastic results, that is a brilliant combination of camera and scope. I was out with my 72mm frac and lodestar last night, quite pleased with the results, but yours are in a different league. :)  Will post my in a separate thread.

Share this post


Link to post
Share on other sites

Thanks Rob and Martin for the kind comments, and to everyone else for your likes!  It's gotten smoky here on the West Coast, as smoke from fires burning in California up through the pacific NW and into BC have all combined to make our skies hazy and indistinct this past few days (I hear it's been smokier for much longer for some areas, so I won't complain too much....) .  Anyway, thought I'd share some shots from the last round of EAA a little bit ago, with the 5" Borg refractor at f/5 and the Trius 694 and filter wheel combo, short exposures and usually only a few subs.  Some Halpha shots too.  The skies during this session were definitely slightly hazy (this was before the main forest fire smoke moved in), but even so got some decent results.  

I don't have Don's lovely dark skies, but I was thrilled to finally be able to get a reasonable view of the Helix (it's VERY low here, even at the best of times, and with the hazy skies I was doubly uncertain it would turn out....).

Cheers.

- Greg A

 

M27.RGB_2018.8.8_23.43.05.jpg

M20.Trifid.M21.RGB_2018.8.9_00.09.54.jpg

M16.Swan.Halpha_2018.8.9_01.10.10.jpg

Pacman.Neb.Halpha_2018.8.9_02.50.43.jpg

M33.Pinwheel.RGB_2018.8.9_02.46.57.jpg

NGC.7293.Helix.Neb.RGB_2018.8.9_02.15.20.jpg

Bubble.Neb.M52.RGB_2018.8.9_03.06.56.jpg

NGC.891.L_2018.8.9_04.30.54.jpg

NGC.7331.Stephan.s.Quintet.L_2018.8.9_03.47.43.jpg

  • Like 3
  • Thanks 1

Share this post


Link to post
Share on other sites

Really nice captures, must have been fun watching those appear on the screen. That Trius looks like a really sensitive camera, I had a quick look at the spec and it seems to be almost as sensitive as the Lodestar (with of course masses more resolution) and a lot more sensitive than the Ultrastar? Presumably if you bin, you still get a decent resolution but it is even faster?

Share this post


Link to post
Share on other sites

Hi Rob,

I'm running the Trius 694 in 2x2 binning mode.  There seems to be a bug in SLL for the Mac that won't allow me to run it 1x1 (crashes) or any other binning mode (distorted images).  

Luckily, 2x2 seems to be useful in terms of balancing resolution with sensitivity; it isn't quite as sensitive as the Lodestar X2, but close enough, and with larger FOV and higher resolution, even at 2x2.

I haven't had a chance to use the Ultrastar, so can't say how that compares....

Cheers,

Greg A

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By jadcx
      Starlight Xpress USB mini filter wheel including Off Axis Guiding. Now only £150
      This is a great little filter wheel, ideal for compact set-ups:
      Starlight Xpress Mini Filter Wheel with integrated Off-Axis Guide prism
      The wheel is USB controlled and powered
      5 x 1.25" filter positions
      OAG is designed to be close to par-focal with most SX cameras
      The SX Lodestar, SuperStar or Costar guide cameras (not included) are fully compatible
      T-thread front and rear - there is currently a M56 adapter fitted for direct connection to the SW 0.85x reducer/flattener, and original T2 adapter included
      Manufacturers spec. And detailed dimensions available from Starlight Xpress
      RRP at FLO is £280
       
      Collection from Nottingham, or DHL for £10 (based on UK delivery)

    • By jkfrazier60
      I have an Ultrastar Color camera. I'm having difficulty with Starlight Live on my iMac.  I have the latest version installed.  When I load the software the camera is connected, but when I try to acquire an image, I never see anything.  The bar at the left bottom of the screen indicates the image is being acquired, but the software image screen remains black no matter how I change the exposure settings.  It works perfectly on my Windows 10 pc, but I need to use it on my iMac.  Any suggestions? 
      Thanks so much, 
      Joel
    • By jadcx
      Hi
      I’ve recently got some shiny new kit, and last night was the first clear skies here when I had the opportunity to try it all out.  This is not my first time observing, so I’m well prepared for unexpected issues, but it is my first time ccd imaging.  There was lots of learning, including; cable management needs to be better, I (still) never have the right USB cable, and the focus tube needs some mechanical refining to address slippage.  But the problem I’m not sure how to solve is one of focus.
      I bought the SW Trius 814 kit (Trius 814, mini usb filter wheel with OAG, and Lodestar X2) and naively thought that perhaps if it was sold together it would all work together.  And maybe it does, I’m not immune to stupidity
      I could achieve focus with the 814 relatively easily, and even captured a test image and solved it in Ekos, all very heart warming.  But I couldn’t then get focus with the Lodestar X2 (attached to the integrated OAG in the mini wheel) without pulling the focus tube out considerably further (approx. 50-80mm I didn’t measure).  This obviously isn’t ideal.  Am I missing something?
      The setup is:
      ED80 -> Field flattener -> filterwheel with OAG ->  Trius 814  with the Lodestar attaches directly to the OAG.
      All advice appreciated, and please don’t imagine that I won’t have missed something ‘obvious’  
       
      Thanks
       
      Justin
    • By kbrown
      I bought an Opticstar 2" Manual Filter Wheel and the plan is to stick an arduino controlled stepper motor on the wheel perimeter to turn it. Magnets and hall effect switches will be used to keep track of the position and which filter is active. The mechanical design is done using the open source apps LibreCAD and FreeCAD. G-code for my CNC mill is produced using HeeksCAD and the mill itself is controlled by LinuxCNC. Electronic design is done using the awesome KiCad which recently has had a massive boost by the propeller heads at CERN.
       
      The mechanics is almost done. Still need to etch the PCB and put it together before the real fun begins writing the firmware
       
      Clear skies,
      K











    • By arkosg
      Hello all,
      I'm hoping Paul or someone who has used Starlight Live with a Trius camera sees this and can point me in the right direction!
      I've borrowed a Trius XS694 (mono) to try out.  I have it plugged in to the AC adapter, and am using the USB cord that comes with the camera to connect it to my Macbook Pro's USB port.
      When I attach the SX Trius 694 it shows up in Starlight Live 3.3 (checkmark symbol) as Starlight Xpress SX694 (F/W 25.1).  I can set TEC, mono, binning, etc.
      However, as soon as I try to do anything (eg. start to take darks), it pauses, then loses the camera connection.  I have to physically unplug and replug the camera to get it to show up again.
      My understanding was that SL supported the SX cams... do I need to do something else (command line?) before connecting the cam? Or...?
       
      On a related note: I'd also appreciate the proper command line syntax to view FITS files generated by the cam (assuming I eventually get that working!) 
      Thanks so much in advance!
      - Greg A
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.