Jump to content

Stargazers Lounge Uses Cookies

Like most websites, SGL uses cookies in order to deliver a secure, personalised service, to provide social media functions and to analyse our traffic. Continued use of SGL indicates your acceptance of our cookie policy.

sgl_imaging_challenge_banner_globular_clusters_winners.thumb.jpg.13b743f39f721323cb5d76f07724c489.jpg

Recommended Posts

This is open cluster Pismis 4 in the Vela constellation and backed by part of the Vela supernova remnant. Some information regarding Paris Pismis and her catalogue can be found on this link.

http://sandandstars.co.za/2018/01/25/paris-pismis-and-her-catalogue-of-open-clusters/

original.jpg

Telescope: William Optics FLT132

Guide Scope: QHY OAG

Camera: QHY9 Mono @ -20c

Filter Wheel: QHY 7 position Ultra Slim

Filters: QHY 36mm unmounted L R G B

Guide Camera: QHY5L-II

Mount: AZ-EQ6

Mount Control: EQASCOM

Focusing: SharpSky Pro and Sequence Generator Pro 3 (automated)

Capture Software: Sequence Generator Pro 3

Guiding Software: PHD2

Calibration and Stacking Software: PixInsight

Processing Software: PixInsight

Number and Type of Data Frames: L= 18X10 min, R= 6x7 min, G= 6x7 min, B= 6x7 min

Binning: 1x1

Total Image Time: 306 minutes

Location: Lockleys Observatory B, Tanunda, Sth Australia

Light Box by Exfso

  • Like 3

Share this post


Link to post
Share on other sites
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Lead_weight
      Spent the last three nights imaging these three objects. Managed to get them all in the same frame of my ES 102mm FCD100 scope. Pretty happy with how it turned out. I would have liked to have grabbed a little more SII data. When I originally captured it, I thought I might only have two clear nights, so I imaged it as HA/OIII. Turns out there's almost no OIII. On the third night, clouds were supposed to roll in about 4am, cutting the imaging session short, but it stayed clear the whole night, and I got a full night of data with the exception that I got a late start due to technical issues when I first started imaging.
      The ASI1600's halos are rearing their ugly heads on the two brightest stars. I tried to tone them down some by desaturating the colors around both stars...it worked a bit.
      Another 15 hours and I could probably get rid of any remaining grain, but just don't have the clear nights to get it done. 15.8 hours total imaging time.
      Equipment:
      Celestron CGX Explore Scientific 102mm FCD100 ZWO ASI1600MM-C ZWO Filter Wheel with Astrodon 5nm filters ZWO ASI290MM Mini guide camera  Stellarvue F50G guide scope
    • By Toxophilus
      I finally got round to testing my new configuration using a Pegaus Ultimate Power Box. So now only 2 cables going to the mount for everything instead of a tangled spiders web. I'm pleased with the results so far, just have a few minor things to change but I just randomly picked a target of Messier 39 to test it all with and was not expecting much. But I was delighted with the result for something that was only going to be a basic test.

    • By MeyGray3833
      Howdy.
      I got out of my depth on this one, surprisingly hard to process and the colour data was rubbish, not to mention all the other stuff that is wrong with the image! We are our own worst critics!
      Anyway, the image is loosely centered on open cluster Pismis 4 backed by part of the Vela Supernova Remnant.

      Telescope: William Optics FLT132
      Guide Scope: QHY OAG
      Camera: QHY9 Mono @ -20c
      Filter Wheel: QHY 7 position Ultra Slim
      Filters: QHY 36mm unmounted L R G B HA OIII SII
      Guide Camera: QHY5L-II
      Mount: AZ-EQ6
      Mount Control: EQASCOM
      Focusing: SharpSky Pro and Sequence Generator Pro 3 (automated)
      Bahtinov Mask: Yes (initial focus)
      Capture Software: Sequence Generator Pro 3
      Guiding Software: PHD2
      Calibration and Stacking Software: PixInsight
      Processing Software: PixInsight
      Number and Type of Data Frames: L= 18X10 min, R= 6x7 min, G= 6x7 min, B= 6x7 min
      Ha= x , SII= x , OIII= x .
      Binning: 1x1
      Total Image Time: 306 minutes
      Location: Lockleys Observatory B, Tanunda, Sth Australia
      Light Box by Exfso
       
      Thanks for looking.
       
       
       
    • By Djt
      Hi
      thought you might be interested in this.
      The Jewel box sits in Crux and is pretty spectacular in an eyepiece.
      This was captured using MaximDL and processed in PixInsight. Not much was done in terms of processing but as the stars are fairly young I boosted the blues a little as in its basic processed state they were pretty much white (so shorter subs needed?)
      location  - Sydney
      gear
      GSO RC10a Truss (first light)
      Moravian G2 8300 with astronomiks filters
      AP900 mount
      Image data, RGB 24:24:24 in 3 minute subs
      Cheers
       
       

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.