Skywatcher Neq6 pro damaged cap replacement

[TonyGut]

Hi all...just embodying the rowan belt mod on my NEQ6 pro and noticed that somehow I've managed to damage the black blanking cap covering the hole for the polarscope ..anyone know were I could get a replacement? Or does someone have a spare I could buy off them?

thanks 

[teoria_del_big_bang]

I don't know where to get a spare but sure you can.

If you are struggling I could print you one that would at least do for now.

Steve

[Bizibilder]

You may find one on a site like Astrobuysell or try our very own Wanted section.

[TonyGut]

Ok thanks for the suggestions 

[r3i]

Here: https://www.pierro-astro.com/materiel-astronomique/montures/kits-de-modification/capot-de-vis-sans-fin-pour-eq6_detail

[cletrac1922]

Not sure if a 35mm film canister fits

Knows it fits focuser tube, as had a club 10" dob that came back from loan with focuser cap missing

 

 

[TonyGut]

Thanks again guys for the suggestions..sadly brown dwarf that's the wrong cap..the cap I need fits on top of the RA and covers the hole that's used to polar align.The black cap with the serrated edge.

[r3i]

2 hours ago, TonyGut said:

Thanks again guys for the suggestions..sadly brown dwarf that's the wrong cap..the cap I need fits on top of the RA and covers the hole that's used to polar align.The black cap with the serrated edge.

Sorry, my bad, hadn't read your post properly 

Pierro Astro sell quite a few handy spares for the EQ6 but sadly the polarscope cap isn't one of them.

[knobby]

https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwicm-Dj44nbAhVFjRsKHenzBIQYABADGgJ3bA&ohost=www.google.co.uk&cid=CAESEeD2CZ7FL_DDkho5EJ9-y0VV&sig=AOD64_2SSjKQZ0gGhVjZz5_reezAYIFJeA&ctype=5&q=&ved=0ahUKEwja1Njj44nbAhWObMAKHWPvAoYQ9aACCD0&adurl=https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwicm-Dj44nbAhVFjRsKHenzBIQYABADGgJ3bA&ohost=www.google.co.uk&cid=CAESEeD2CZ7FL_DDkho5EJ9-y0VV&sig=AOD64_2SSjKQZ0gGhVjZz5_reezAYIFJeA&ctype=5&q=&ved=0ahUKEwja1Njj44nbAhWObMAKHWPvAoYQ9aACCD0&adurl=Kitchen door hinge hole blanking plates

https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwicm-Dj44nbAhVFjRsKHenzBIQYABADGgJ3bA&ohost=www.google.co.uk&cid=CAESEeD2CZ7FL_DDkho5EJ9-y0VV&sig=AOD64_2SSjKQZ0gGhVjZz5_reezAYIFJeA&ctype=5&q=&ved=0ahUKEwja1Njj44nbAhWObMAKHWPvAoYQ9aACCD0&adurl=https://www.diy.com/departments/b-q-hinge-cover-dia-35mm-pack-of-4/254621_BQ.prd

 

[TonyGut]

Just ordered the cap thanks Knobby!