Jump to content

sgl_imaging_challenge_2021_annual.thumb.jpg.3fc34f695a81b16210333189a3162ac7.jpg

Recommended Posts

Hi

need some expert advice, I have been looking at the celestron 800 edge hd cgx.

is this kit any good and can someone clarify that this is a go to mount with a hand controller capable of slewing to any object in its database (the same as celestron nextstar), if so how does the handset work around doing a meridian flip?

 

i have also been looking at the celestron cpc 1100 gps xlt, if I fit a hyperstar to this telescope would I be able to do astrophotography with this telescope without buying the hd wedge, as I know it will make it roughly a f2.3 and I would be able to take 20 second exposures.

sorry for all the questions but I know you guys are the font of all knowledge!

Edited by lostboys
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By StarPrincess
      Moon Surface 16 April 2021 21:32 Celestron NexStar 6SE ZWO ASI 462mc
    • By CKERR
      Hello,
       
      I am new to using a telescope but am an avid manual reader and usually a fairly quick study.     I have bought a pre-loved Celestron Nexstar Evolution 9.25 {originally purchased in Sydney Australia in 2014} and am struggling to do the 2 star alignment.   I have reset the scope to Factory Settings and have added my location, correct time, STD or DLS time; time zone etc.     I take the scope out and level it, align the marks on the base of the motor and on the arm that holds the scope.   I point the scope whilst still levelled and marks aligned North.     I try to align to Sirius and the scope points to my feet.    I have tried following the steps but nothing is working.   
       
      I have tried using the SkyPortal App and that is more of a success but still not quite.   I try to align Sirius and it will point up and very close to the star but not aligning with it.   I ask it to GoTo the stars in Orion’s Belt and it will be close but not quite so not aligned....at least it isn’t pointing to my feet.
       
      Any suggestions would be welcomed.   Thank you.
    • By chrobakx
      This is Celestron cg3 mount suitable for any telescope tube with vixen dovetail.
      Load capacity is approximately up to 4 kg
      Condition is used, but in very good shape. 
      It's comcompletely with 3d printed levelling plate, under tray for accessories, slow motion and locking knobs.
      Mount was completely stripped down, removed factory sticky grease and applied proper grease where applicable.
      Price: £90
      I can post it by Hermes or DPD if you are happy to pay for postage.
      I'll accept PayPal as family/friends or commercial if you'll pay the 3% fee.






    • By AlvinP
      Hello,
      I've been on these forums a couple of times for the last 2 weeks and ive found amazing advice, on telescopes, mounts and eyepiece. Besides reading countless of information on the internet about various equipments; pros and cons; and i got some queries about how to upgrade my setup.
      My original purchase was a 15x70 Celestron Binoculars last year, and boy ive seen amazing things with it, specially globular clusters, Jupiter and Saturn and the Orion's Nebula; for me these were amazing; i still use them given how easy it is to look at the sky with them and how bright and full everything looks.  A couple of months ago i got a 70x400mm Gskyer Telescope with an AZ mount (The cheap 99$ one that Amazon is displaying on all its adds for the last two months)  it came with a 25mm and a 10mm eyepieces as well as a x3 barlows (which i didnt even count as part of my scope as it is too bad quality and i havent managed a single decent view with it).

      Currently My Celestron Binoculars (x15) seem better for visualizing the sky than the 25mm eyepiece (x16) (things seem a very bit dimmer). And since the Barlow is a "no go", the 10mm (x40) eyepiece is what i really use, it has decent zoom and detailed views , it is my go to eyepiece most of the nights.
      However from reading all around, ive read that most of the stuff that come with the Telescope (aside from the scope itself) are actually really bad quality, specially no name brands without even webpage, so if i were to maximise my telescope i should update some of those items.
      -Recently i ordered a new Start diagonal to replace to default one (ive heard on Refractors its usually the weakest link next to eyepieces) as well as an economic x2 Barlow lens
      Keep in mind i recognize my 70mm cheap telescope will not suddendly become the Hubble Telescope, and that it doesnt matter how hard i push it, in the end such a low scope will be bound to hit its limit pretty fast, thats why i avoid 70$+ eyepieces and barlows for now.
      I expect to keep using this telescope for a good couple of months; at least until around August, when Jupiter and Saturn are more in the night sky, rather than morning.

      Now, im very satisfied with my current telescope; while the phone mount is garbage and the phone weight and the sound of my heartbeats pretty much shake the telescope out of position, as well as how cheap the mount is; it still gets the job done for seeing interesting stuff in the sky and i have managed to do some AP for some of the globular clusters, bunch of 1-2s images (with the wrong lens), not the best, not even good pictures; but decent overall for my equipment. I am currently interested in stargazing in general and some minor AP (as i dont have a camera, currently an Iphone 7s with the mount) Buuut im interested in borrowing a camera for the low sky photos without a telescope.
      I do most 97% of my Skywatching on my backyard, i live in a small country, there is some light pollution, but i can see the pleiades and the orion's nebula core on the naked eye most nights (so i guess its not that contaminated lol)
      Now; currently i like finding stuff by myself and show it to the other people around me who cant be bothered to find the moon in the sky, so setting up, finding and seeing stuff is part of what i like. 
      With all the above in mind..... Id like to plan ahead for my next purchases.
      First, im thinking a x3 barlow lens (to replace the original crappy one) and a 15mm lens (to have a bit better view than the 10mm, but less spread than the 25mm) in two or three months (with this id be able to check if my new eyepiece outperforms my default ones, but given the quality of the scope, i dont expect this to be noticeable).
      And Afterwards id love to get a new Scope, but im not quite sure what i want... and i would like some advice and help in choosing my next Scope upgrade.
      -I entered with and im liking the refractors; however i dont wanna spend 300-400$ on another refractor that is 20-30% better for triple the price
      -Ive heard really long focal lenght might bring some distortions; and also make the scope much bulkier, annnd most importantly i know that magnification is not everything; so a 1000mm long tube would prob bring too much magnifications for me to use properly on my backyard skies. So i think id settle for a maximum of 600-700mm.
      -Originally i was againts Newtonians in general, those inverted views scared me, i have a hard time of my own with my finderscope. Then i found out that Reflectors are the name of efficiency as they have more value per aperture than refractors; and as someone once mentioned "There is not really up and down in space, you will get used to it" annnd its true... save for references on the ground, like buildings, trees and mountains to help you locate where you are in the sky; once you are on it, you dont need right ups and downs.
      -I did see some 90mm Orion's Refractors as well as 90-102 Celestron Astromaster Refractors (these are 350-400$)
      -Im thinking a 130mm reflector is what im looking for; i think the 130mm aperture is a nice upgrade for my 70mm, and will keep me occupied for quite a long time; ive read about Orion SpaceProbe 130EQ and Celestron Astromaster 130EQ (ive also read, Power Seekers and Astromaster's are made out of pretty much garbage lol) Ive read that the main issue is the constant collimation required for them; but ive also read its something that can be learned and once you get used to it; its a pretty easy thing to do to keep getting amazing views.
      -Ive also seen people recommending  6-8'' Dobsonians; i know the deal with them; if anything i could aim for a 6'' one i found a litter under 300$ ive read they are amazing values for their aperture
      So, TL;DR: I have a 70x400mm Telescope, im new to stargazing, im really amazed and excited by what im seeing with my current scope, but would like an stable upgrade before the end of the year that will last me a year or two. I am interesteted both in regular and deep sky stargazing and astrophotography;  im not currently interested in an motorized mount; could deal with a regular Equatorial mount. But overall i am looking for  more aperture (100-150mm) to have clearer views; than focal lenght for zoom.

      Im also open to the fact that at one point i might have to get a scope for stargazing and another for AP; but would like an upgrade that could help me all around for both while i get initiated.
      ------------------------------------------------------------------
      Sorrry for the Huuuuuuuuge post, i was very excited while writing it; please let me know what you think and if there's anything else you'd want me to add to help understand my situation, thanks in advance!
       
       
    • By Wish-It-To-The-Cornfield
      Complete newb here only 1 month in to it all.  Researching as much as I can each day and trying to learn new things every hour.  Here's my rig:
      Celestron AVX 8" SCT
      Celestron AVX Mount
      Celestron 2x Barlow
      Various Celestron additional eyepieces
      Celestron Starsense Auto Aligner
      ZWO ASI 224mc color cam
      I believe I can use the 224 cam as part of an auto guider solution and am wondering what else I would need for that, assuming I would be best servers with an off axis guider solution.
      Many thanks in advance...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.