Recently Browsing 0 members
No registered users viewing this page.
I just try to show the beauty of the night sky, and again the possibilities with a smartphone. There are already better applications at the google play to make the night lapse easy. At first I used the Gif maker pro. It's a good app to edit the frames, before creating video, but you can't save the videos in good quality. Now I use the TimeLab app (same developer, as Intervalometer app), in the editing it has not so many options, but with this app you can save the videos in 4K too, or full HD. This video is 360 frames (each 30 sec exposition at ISO 800) Huawei P10 monochrome camera, Intervalometer app, TimeLab app. Pictures taken in Kleinwalsertal, Austria 2019. 09. 23-24. (The video is full HD, I don't know, why, but it doesn't run continuesly on my PC, when I watch that back on SGL. I hope, on your monitors you can enjoy it!)
Ladies and gentleman,
Thank you for helping me in advance.
As a kid I've always been fascinated with the sky and what was in it. The nights sky is filled with beautiful stars and nebulae and I want to see them for myself and be amazed how insignificant we really are compared to this vast open space. So let me adress some of the key points that I want for a first scope.
1. Around €1000
2. Big aperture, I want to see as much as possible and as far as possible while not losing a clear image
3. I would like to have a push to or go to system
4. Beginner friendly
5. Size is not a problem
8. I prefer reflectors since it seems they give more aperture for the money but if you know a better scope that sees more with less aperture let me know
9. I have a Canon 550D and maybe I could use this for a bit of astrophotography. This is last on the list tho and can be scrapped if the first 3 points aren't met
Of course build quality is very important when making my choice so keep that in mind as well.
I'm looking forward to you guys advice.
Happy stargazing and clear skies!
I have recently bought a Orion Starshoot Autoguider. I downloaded phd 2, eqmod and ascom stuff. After a small research I found out my mount (exos 2 gt) doesn't support computer acces without firmware upgrade and fancy cables but I have the st4 port so it shouldn't be a problem. In phd I choose camera as Starshoot Autoguider and mount On-Camera. Aux mount and AO are both none. My wiring is one cable to pc from camera and another to st4 port from camera. When I started looping I selected the star with no problem. I choosed the one star alignment option from my hand controller and after centering the Archturus in the middle of view I pressed ok and it was successfull. I started guiding and after a while I get the error: RA calibration failed star didn't move enough.
My club's Atlas is stuck on the date 11/13/2099. Last night was 6/28/2019. Every time I reset the date and started the 3 star alignment the scope chose Vega and then pointed to the western sky - sorta wonky. When I tried a second star it aimed at a totally wrong part of the sky. I went back to date and it had reset to the11/13/2099 date. The mount has a working GPS module. I went through all the menus and there was no place other than the " sub menu to attempt to replace the errant date. After five tries I gave up. Apparently the GPS was accurate to withing a stride or two. What should I try next? I know my club; they'd rather stuff it in a corner than take the time or money to fix it. So it will be m time and my money. I used the mount several times this year and had no problem.