Jump to content

sgl_imaging_challenge_2021_2.thumb.jpg.72789c04780d7659f5b63ea05534a956.jpg

M33 - 70D+414_osc+428_Ha


Recommended Posts

This was an experiment in imaging one target (M33) with three cameras and then combining the three components into one composite image.

  • 70D dslr+ED80DS - 10x120s + 10x180s + 10x240s combined with HDRComposition in PixInsight.
  • 414osc+ED80DS - 7x600s processed in PI
  • 428(Ha)+WO-ZS71 - 10x600s Ha processed in PI.
  • All the components were registered in PI using StarAlignment.
  • 30% of 428-Ha was combined with the 414-Red in PS using a Lighten layer.
  • The Ha enhanced 414osc image was then combined with the widefield image from the 70D using a masked layer at 45% opacity.

5a42be1ccad52_M33-70D_HDR414_osc428_HaNik.thumb.jpg.bba43ed16cf2600a66e6508328575a78.jpg

I was trying to get the wide field view from the dslr with the enhanced detail from the 414/428 but I'm not sure it has worked.

Any advice and help would be much appreciated.

Thank you for looking.

Adrian

 

 

  • Like 3
Link to post
Share on other sites
8 minutes ago, MarsG76 said:

Great amount of detail... using 2 different cameras might have brought out a bit more details in the galaxies nebulousness.

Thank you.

I think my processing skills are limiting the detail that is available in the data; in an attempt to control the noise I think I might have lost some nebulosity.

It's all part of the learning process.

Thanks again.

Adrian

  • Like 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By wsteel33
      Finally built a peltier cooler for the canon 600D. Credit goes to Martin Pyott for the originl design:
      https://www.youtube.com/watch?v=LVrTpCn1MhA&list=WL&index=1
      I had to modify the design slightly due to the aluminium plate snapping and a comedy of errors on my part, such as not being patient enough in drilling the copper plate and snapping a drill bit in the hole.... all learning experiences.
      I was going to invest in a dedicated OSC astro camera but this will allow me to get a bit more milage out the old faithful DSLR. I have attached photos of the finished project and Darks (10 min at ISO 1600) and was impressed and surprised at the difference this mod made in noise levels. The cooler managed to drop 7 degC on ambient after running for about 15 min or so. I don't know how cold it will get when running for longer, and know it wont be able to compete with a dedicated astrocam, but any cooling is a bonus, right? At about £35 for the parts this saved me a fortune which will go into the dedicated TEC cooled mono camera fund.
      Next on the DIY list are a power box (with power for the mount, camera, dew heaters and RPi: I have already made my own 12v power distribution box which sits on my EXOS2 "portable" mount) and a couple of auto focusers using the MyfocuserPro2 project on sourceforge (the parts are winging their way to me as I sit here). The savings bring that dedicated mono camera all the closer 😀.
      Any advice from anyone who has made these projects very welcome (maybe it will help me avoid more silly errors) or ideas for other projects too.
      Clear skies 💫
       

      D_0003_ISO1600_600s__20C.CR2 D_0001_ISO1600_600s__13C.CR2
    • By MarsG76
      This is NGC3603 and NGC3576 (AKA The "Statue of Liberty" nebula), a massive H-Alpha region containing a very compact open cluster, located in the constellation "Carina" about 20,000LY away.
      I took this photo during two nights, 14th and 15th March 2021. Imaged using a active cooled and full spectrum modded Canon 40D DSLR attached to a 80mm f6.25 refractor on a CGEM equatorial mount.
      Total exposure time was 3 Hours and 31 minutes in natural color through UV/IR Cut filtered subs from a semi rural sky.
      RGB: 19x60s, 19x120s, 18x180s and 20x300s subs @ ISO1600.
    • By micovn
      This is a lens that does not need an introduction, it's simply a fantastic budget lens! I've been using it for astrophotography with great results and satisfaction (see pictures). Just selling it becuase I'm upgrading to the 135mm version. Any questions please ask. Asking £160 which includes P&P to UK mainland.







    • By MarsG76
      This is NGC3603 and NGC3576 (AKA The "Statue of Liberty" nebula), a massive H-Alpha region containing a very compact open cluster, located in the constellation "Carina" about 20,000LY away.
      I took this photo on multiple nights, between 19th February and 15th March 2021.
      Imaged using my cooled and full spectrum modded Canon 40D DSLR attached to a Bosma 80mm f6.25 refractor on a CGEM equatorial mount.
      Total exposure time was 22 Hours and 1 minute using 7nm HII, OIII and SII Narrowband filters and stars are from natural color (UV/IR Cut filter) subs... imaged from a semi rural sky.
      HII: 6x600s, 6x900s and 4x1200s subs,
      OIII: 10x900s, 8x1200s and 1x1800s subs
      SII: 18x1800s subs
      RGB: 19x60s, 19x120s, 18x180s and 20x300s subs @ ISO1600.
       
    • By chops
      I'm posting in the hope it helps anyone else considering a Daystar Scout SS60. The video's not quite representative of what one sees looking through the scope, but gives a general idea of field of view through a 24mm EP.  When observing, much more prominence detail and surface texture is visible to the eye and the colour feels less red than it appears in the vid.
      I'd have taken this video sooner if I'd realised that afocal video would work so well, so I'll try again next time the sun's available earlier in the day during better seeing. The video's taken by holding an iPhone against an Explore Scientific 24mm eyepiece and adjusting exposure (i.e. afocal video photography). Although I find a Plossl as easy (if not easier) to use as a wide EP for observing, it's simpler to align a smartphone with an eyepiece that has a wider field of view, for afocal video. Hence I used a 24mm ExSc (see below for detail). It seems a fairly quiet solar day, not long after the notoriously quiet 2020 and I believe is still close to the beginning of the sun's new 11 year cycle (hopefully it will become more exciting soon but not as exciting as having any Carrington Events pointing towards us).
      I spent some hours, from late morning, watching these prominences form, dissipate and reform. The prom on the Western limb was very tall and bright, looking like a large rectangular tower block, which gradually split, faded as the top looped over to the north, then the top looped back again to the south. At one point this loop appeared to join - forming the outline of the head of a man, whose figure, with arms out, was clear and rather funny. Wish I'd taken this video sooner (or had the ASI183 to hand). The prom quietened and reached its current state (3pm ish) as seen in the video.
      The long group of prominences to the South - 4 main and some smaller - were more dim than the prom on the Western limb initially, but they remained impressive, ranging from good to very small and appeared at one point to be as clear row of pine trees, especially the larger right hand prom, with spiky 'branches' and a distinctive triangular fir tree shape, which gradually brightened then faded to this view. The tip of the ‘sharks fin’ to the left of the group extended out to the east then receded.
      I'm afraid it's not easy to see the detail in such a simple video - it's slighly more visible to the naked eye. By the time I took this video it had gone 3pm, there was more haze and a lower sun and none of the prominences were particularly impressive.
      There were No sunspots easily visible, although a Plage appeared to be visible close to the Westerly limb. Little surface detail other than orange peel, despite tuning the scope (better with the SS60s dial to left of centre for this today). I still need to lots more time with the scope to get the best from it.
      I'm a Ha beginner having only observed in whitelight before and only having used this scope twice before, once in combination with a ZWO ASI 183MC astrophotography video camera. Medium seeing, 6/3/21 'third light' on the Daystar Scout SS60 Scope with fixed chromasphere quark built in - 930mm f15 60mm.
      Various Eye pieces used: Plossl 40mm, Meade Super Plossl 26mm, Explore Scientific 24mm and 11mm 82 and 68 degree EPs gave good clarity and contrast, but the seeing's not good enough for close viewing of proms.  ioptron motor, roughly pointed north was perfectly sufficiently good to keep the sun in view for at least 45 mins at a time. I'll edit this post to add a pic or two of the equipment setup in a moment.
      3 images attached are: Afocal Smartphone still image (contrast increased in smartphont), plus two shots of the setup.
       



×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.