Jump to content

Stargazers Lounge Uses Cookies

Like most websites, SGL uses cookies in order to deliver a secure, personalised service, to provide social media functions and to analyse our traffic. Continued use of SGL indicates your acceptance of our cookie policy.

Stub Mandrel

Great Orion Nebula and the Running Man now with added Trapezium

Recommended Posts

34 2-minute subs, no darks. Exif says 6c so the sensor was probably somewhere between -15 and -20C!

Begging for a few more hours!

imageproxy.php?img=&key=bdf8b2134cef9d8bM42.thumb.png.0ca4f97e65be496fc75549b1133096ec.png

Edited by Stub Mandrel
  • Like 17

Share this post


Link to post
Share on other sites

That's a nice strong, colourful image Neil, with the whole of the 'smokey ring' visible. If you take some more subs on this, perhaps some rather shorter ones so that you can get some definition in the core?

Ian

  • Like 1

Share this post


Link to post
Share on other sites

I finally found my trapezium subs at the same image scale! Makes the bright patch seem a bit flat, perhaps? Sharpened a version and added in at 33% as well so it pops a bit more.

5a108a65e0cff_M42withtrapezium.thumb.png.bf8ed02a0a02fad2fd249e8f8e671c80.png

  • Like 3

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Lee_P
      Lots of astro kit for sale! Payment via bank transfer or PayPal (buyer to pay fees). Reasonable offers considered.
       
      1. Sky-Watcher Evostar 80ED DS-Pro Outfit with auto focuser upgrade -- £350
      Comes with diagonal, 28mm 2” eyepiece, 2" to 1.25" eyepiece adapter, dovetail, tube rings, SkyWatcher Auto Focuser, HitecAstro DC Focus Controller USB, metal case. Approx. cost new: £562. Buyer to collect from central Bristol, or buyer to arrange for a courier. Note: doesn’t come with a finder / guider, but I have some available (listed below).
      Main items similar to: 
      https://www.firstlightoptics.com/pro-series/skywatcher-evostar-80ed-ds-pro-outfit.html
      https://www.harrisontelescopes.co.uk/acatalog/skywatcher-auto-focuser.html
      http://ensoptical.co.uk/hitecastro-dc-focus-controller-usb
       
      2. Sky-Watcher .85x Reducer/Flattener for ED80 -- £120 inc. recorded delivery to mainland UK 
      https://www.firstlightoptics.com/pro-series/skywatcher-85x-reducer-flattener-for-ed80.html
       
      3. Sky-Watcher Skymax 150 PRO -- £300
      Comes with diagonal, 28mm 2” eyepiece, and dovetail. Note: doesn’t come with a finder / guider, but I have some available (listed below). Buyer to collect from central Bristol, or buyer can arrange for a courier.
      It's an earlier version of this: https://www.firstlightoptics.com/maksutov/skywatcher-skymax-150-pro.html
      Works well with items 7, 8, and 9.
       
       
      4. Sky-Watcher 9x50 and QHY5 mono guidescope -- £150 inc. recorded delivery to mainland UK
      Includes T thread adapter attaching the QHY5 to the finderscope. Also includes kit to convert into a regular optical finderscope. 
       
      5. Sky-Watcher 9x50 Finderscope -- £30 inc. delivery to mainland UK
      https://www.firstlightoptics.com/finders/skywatcher-9x50-finderscope.html
       
      6. Sky-Watcher EQ3 PRO mount -- £220
      In pretty good condition, and includes the handset for full goto functionality. Unboxed. Buyer to collect from central Bristol, or buyer can arrange for a courier.
      It's an earlier version of this: https://www.firstlightoptics.com/skywatcher-mounts/skywatcher-eq3-pro-synscan-goto.html
       
      7. Astrozap Dew Heater Tape, 6" 'scope -- £30 inc. delivery to mainland UK
      https://www.firstlightoptics.com/dew-prevention/astrozap-dew-heater-tapes.html
       
      8. Astrozap Flexible Dew Shield for Skymax 150 -- £20 inc. delivery to mainland UK
      https://www.firstlightoptics.com/dew-prevention/astrozap-flexible-dew-shield.html
       
      9. StarSharp Bahtinov Focus Mask 150mm Maksutov -- £10 inc. delivery to mainland UK
      https://www.firstlightoptics.com/bahtinov-focus-masks/starsharp-bahtinov-focus-masks.html
       
      Items 1 and 4:


      Item 2:

       
      Items 3, 5, 7:

       
      Item 5:

       
      Item 6:

       
      Item 8:

       
      Item 9:

    • By gutaker
      Hi guys, it's my first post here, so Hello!
      My synscan goto upgrade started to act like in this video of mine SynScan GOTO Skipping after being disassembled for few weeks in the closet. There were no such problems before.
      When it slews at rates above x3 everything is fine and smooth but as soon as it starts tracking at x3, it skips steps or something like that.
      My setup is eq3-2 on alu and SW 150/750 with Canon 700D attached.
      Thanks in advance for any clues or ideas!
       
    • By Phillips6549
      Complete beginner question regarding using this mount.
      When I have tried to set up and align the mount , the goto targeting is off by many degrees.  Here's what I do - can someone tell me what I'm doing wrong!?
       
      With the power off:
      Align the tripod and mount to North and, with the clutches released, set the declination to my latitude (52deg 28' N). and the mount in the weights-down home position.
      Lock the clutches and fine tune the alignment on Polaris using the mechanical adjustments on the mount.
       
      Turn the power on:
      Set up the date, time and location, elevation etc. in the handset (noting the American Date format and Longitude first (set to W 1deg 48')
      DST = Yes
      Select 1 Star align
      Pick a star, I usually try Procyon or Betelguese depending on the time.
      The scope slews to vaguely the right direction but actually nowhere near.  It can take 2 or 3 minutes of manual slewing to centre the star in the eyepiece.  Finishing, of course, with an up and right movement.
      Finally, press Enter to complete the alignment ==> Alignment Successful says the handset optimistically.  
      Now from the object menu pick another target.  Try, say, Polaris which was where I started and ... nowhere near it.   It's the same regardless of the selected target.
       
      I have tried 2 star alignment and 3 star alignment, a factory reset before starting,  but nothing seems to work.   Once i'm lined up on a target the mount tracks nicely - it just won't go where I want it to!
      Not yet at my wits end but - Help!  
      Mark
    • By cjdawson
      Hi everyone.
      A friend has an EQ3 Goto mount, I think it's the Sky-watcher one.    Currently, I know nothing about them, except that he's having issues getting it to work.  To the point that he's getting so frustrated with it he's seriously starting to thinking about throwing the mount away.
      He's described what's happening to me.    What he's saying is that the mount never points to the place where he's asked it to point.    He's saying that say the scope is supposed to point towards something in Orion, it'll end up pointing somewhere on the other side of the sky.     He's also said that it doesn't seem to want to track past a certain point in RA.
      I'd thought rather than simply jump in and try to help him out and get just as confused,  I was wondering if there's some check list of common EQ3 faults that I could work through to see if we can solve the issue.
       
      Once thing I do know is that he's running the mount from a dedicated tracer battery, so it maybe safe to assume that the power supply is good.   (althought it's something I'm going to double check as I don't want to miss anything)
    • By Stub Mandrel
      To my surprise last night wasn't a complete write-off. I managed to get another 135 minutes of decent 5-minute frames of M31, this time without my LP filter. Total of 3 hours 55 minutes with my cooled canon. There was some streaky noise caused by drifting very thin cloud.
      The subs were much brighter and no moon plus high elevation meant I got away with it. The mix of frames with and without filter stopped the core being too badly blown out. I think I've controlled my urge to over-process this time, but any suggestions for improvement welcome.

       
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.