Jump to content

sgl_imaging_challenge_2021_annual.thumb.jpg.3fc34f695a81b16210333189a3162ac7.jpg

***SOLD*** Skywatcher 250px Flextube with GoTo


Recommended Posts

I bought this at the start of the year with some xmas cash i had, and its been great, but recently ive had back issues from the gym, and my neighbour has installed a load of lights in their garden, meaning i now need something a bit lighter and more portable so i can go elsewhere to observe.

It is a used scope obviously but as far as i know its in good condition, all the GoTo system works, ive never messed with any screws for collimation etc as i dont know how to do it lol, the previous owner assured me the mirror has never been cleaned or touched, and its been kept in my garage under a telescope cover, the middle cover, the EP cover, and the elasticated end cover are all with it.

The previous owner has fitted wheels to the base which does make it moveable, but i thought that by pushing it up the street it might affect collimation so ive only ever pushed it a few feet and then lifted it out of my garage. Also fitted is a counterweight, I found this really helps. It will also come with a light shroud, pretty sure its the Astrozap one, and the original EP's. 

As far as im aware it was the previous owner who added the GoTo handset to this scope, im pretty sure it didnt come with it from new, it had a smaller controller with no display which will also come with it, it all works fine ive never had a problem with it, the only small issues ive had were all user error as this is my first scope, wrong date and time etc

Being reasonably new to astronomy im not quite sure what to price this at, and it would be collection only im afraid, from St Helens, Merseyside. I still have the original boxes if required but obviously the base is built up so wouldnt go back in the box.

Pics to follow soon

Looking on eBay i can see two 250 dobs priced at £400+, neither are the flextube or have GoTo

Price reduced to £500 as id like a quick sale, ive bought a new scope now and need to the money for a few bits for that before i go away on holiday

Edited by BRUN
Link to post
Share on other sites

just to add to this, i also have the original smaller hand controller, the battery pack, a cig lighter power lead, and the stock EP's

ill see if their is anything else tonight if possible

Link to post
Share on other sites
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By catman161
      Hi Everyone, 

      So it seems that after my clear out of the "Big" scopes life circumstances are meaning it is less and less likely that I will be able to do any astro which is a shame indeed. 

      I am therefore putting my little "Grab 'n' Go" setup up for sale 

      This is an absolute little beauty of a telescope. Really excells on planets and lunar work and solar (appropriate filters must be utilised - never point a telescope at the sun unless you are an experienced solar astro buff!) 

      I was very unimpressed with the flimsy tripod that came with the scope and managed to source a purpose built and absolutely solid portable pillar mount for it. Its is steel construct and is ingenious in that it allows levelling of the feet and also levelling at the plate too thanks to the utilisation of three springs and wing nuts to allow for easy adjustment. 

      Not only is the pillar great for the levelling option it has but it also has removable legs to allow for easy transportation to dark sky sites. The legs simply slid into place and the steel cable is tensioned by hand through easy use of the inline bolt brackets. 

      This is a whole package deal - perfect for anyone wanting to start astro or just have a great little portable setup. 

      SO, whats included? Included in this sale are the following:

      - Skywatcher Skymax 127 Maksutov OTA - mint condition, no marks of blemishes
      - Purpose built solid, tubular steel pillar levelling mount 
      - Baader Planetarium Hyperion 8-24mm clickstop Zoom Eyepiece 
      - Skywatcher 9x50 RACI Finderscope 
      - Greenwitch Astronomy original all weather telescope cover (you can't get these anymore!)
      - Skywatcher Synscan Al-Az mount and Hand Control 
      - 12 V power cable 
      - Original factory fitted straight through 8x30 finder scope and bracket/shoe
      - Instruction manual 
      £400

      This has all been kept in my observatory under the cover throughout. It really is in excellent condition and cost me quite a bit to put together so I have priced it competitively. Please no offers. 

      Is collection only and (of course) covid safe exchange. I prefer bank transfer as payment.





    • By PlanetGazer
      Long storey short :
      the OTA slips dramtecly when vewing an object to 0 altitude.
      Details:
      So I bought the Skywatcher GoTo flextube 10 inch a year ago. It was nothing but great, until yesterday when I was just starting the session to level up the scope on the mount for alignment. I Went to get some equipment and when back noticed the scope has declined to a minus reading on the altitude! With no attachments on the OTA. 
      I re-leveled it to the horizon and it held itself, put on the nothing but stock attachments as usual. Switched on the GoTo and started aligning, when alignment is successful, I chose an object and notice the object is far off.  I check the battery voltage and it's 12.5 volts, which indicates it's not a battery issue.
      I turn it off to re-align again, this time when I press the up arrow to align to an object I notice the GoTo gears struggle to move the OTA upwards, but eventually the speed increase to normal and manage to points upwards to the object. I pick a second object which happens to be near the zenith and the GoTo goes out of control straight to zenith and carrying on above 90+ degrees on the altitude bearing. I try to stop the scope with the handset before the base of telescope hits the wood in the base, only to notice the handset is not showing light or responding. I turn the GoTo off.
      Start to align for the third time, this time aligns but still off target. I ignore and start viewing Jupiter which happens to be 40+ in altitude , after few minutes of viewing, the scope drops slowly to zero altitude with no hand or handset movement! Handset is still showing that the viewed object is still Jupiter!
      Note: I did notice weird sounds of the gears when trying to increase altitude. Not the common sound.
      Has anyone faced this issue and fixed it, should I return under guarantee? Is this a gear slippage? Or clutches not engaged? Your help will be much appreciated!
       
    • By deanchapman2705
      Hi,
      I'm relatively new to the whole telescope thing but have done my research and was fixed on getting the Orion skyquest XT8i or XT10i. By spending that much money, I didn't like the idea of purchasing it online from their website without seeing it in person (and not having the reassurance of being able to take it back) and looked for stores in the UK that would supply them. After plenty of research, it seems like they don't exist anymore and they are only in the US? Is this right or could anyone help me?
      (I've looked at the Sky-watcher 250PX/200PX flextube skyscan goto but it is significantly heavier and the noise of the goto mechanism sounds like a table saw so that's put me off of it...)
      Any help would be much appreciated,
      Thanks
    • By Batesy82
      Hi guys,
      I've literally just signed up so I'm totally new here and excited to learn from all you professional astromaster... 
      I'm not sure if this is the right place to post so I do apologise if not... 
      I'm after a skywatcher eq3 pro goto mount for my celestron astromaster 130eq every website i go on they are out of stock and not available for a couple of months 🙄 does anybody know a stockist that has these in stock? I've only been in the astrophotography hobby 4 weeks so I've got lots to learn... 
       
      Thank you for your help 
    • By Giedrius05
      Dear colleagues,
      I am new in astronomy and got my SkyWatcher Star Discovery 150Pi WiFi AZ GoTo, however I am experiencing one big problem. When I try to align my telescope using SynScan Pro app on laptop or smartphone the telescope always points wrong direction. I do not have hand controller.
      I set telescope north using compass, enter latitude and longitude, but when try to align 1 star or 2 stars, telescope spins way, way off. When the star is in the South East it shows north east, or sometimes points absolutely wrong direction. When it is set on the north and object is 98 degrees east it goes some 30 degrees. It also points lower or higher.
      I am totally lost.
      I use 8 AA batteries.
      What I do wrong?
      How to fix this?
      Thank you.
       
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.