Jump to content

sgl_imaging_challenge_2021_2.thumb.jpg.72789c04780d7659f5b63ea05534a956.jpg

Dovetail and rings for TS-Optics 80 mm Guide Scope (TSL80)


Recommended Posts

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By DeepSkyMan
      Hi everyone, not sure if this is the correct forum for this thread but thought it was close enough to topic 🙂  
      In prep for my Pulsar Obsy build a couple of months from now I’m looking to get ahead of software requirements for the dome.  Can anybody provide advice on a decent ‘Skinny’ software stack for mount and dome control.  Observing has been simple for me thus far, only need to worry about mount control.  However,  I got to thinking about how clumsy and inefficient things would be if goto commands were two separate unrelated actions one for mount control from my chosen planetarium software SkySafari, and then having to reach over and key in the Azimuth setting for dome position.   As far as I know there is no dome control interface from SkySafari, so it looks like this will be achieved via an RDP session into my Intel NUC and thence to the dome controller.   No big deal I guess this will just join my Atik Horizon control Software.  What is my best solution for joint mount and dome control?
      Kind Regards
      Paul.
    • By JemC
      Hi all,
      As i am soon to be the proud owner of a Vixen Polarie star tracker i am looking for some advice from the experts here on SGL with regards to widefield imaging with the Vixen Polarie.
      I will initially be using it with a modified Canon 600D so am looking for advice on which lens would be best suited to use with it, I have already been pointed in the direction of the Samyang 135mm which by all accounts is a pretty good contender, so aside from that particular lens what other/s would you recommend that are Canon fitting,
      Thanks in advance 🙂
    • By DeepSkyMan
      Guys
       
      just wondering what options are available for me to upgrade the standard SXW Vixen clamp to enable it to accept Losmandy style dovetails.  I recently acquired a CGE dovetail that I would like to use with my 8” Edge.
       
      Kind Regards
      Paul
       
    • By DeepSkyMan
      Hi there everybody, hope you are all keeping sane during COVID.  As already revealed in an earlier thread I will be building an observatory this year.  Whilst it’s a bit early for the exterior elements of the build, I’m keeping busy putting together all the accessories I will need from an interior perspective.  In doing so I’ve discovered a couple of thorny issues.
      1/.  I will need a 2.1mm power lead from Vixen to connect up to my new Pegasus UPB2; oh and just saying, what a fantastic piece of kit it is too.  If needs be I can always buy in the whoppingly over-priced AC/DC adapter from Vixen, however I really would like to power everything from a central core, rather than adding to the electrical spaghetti with independent power units.
      2/.  There is also an issue with my Atik Horizon.  Due to the fact that my little SXW is already stressed to the max, I can’t go with the preferred format of mounting the UPB2 on the mount or OTA, instead I will have to locate it as high up the pier as I can, which means that the power cable needs to be longer.  In addition, I will need to source a power lead from somewhere that will interface to the UPB2 and the Atik.  Had a look on the Atik website and there don’t seem to be any options in this regard.
      So I’m hoping that someone has had to deal with similar issues in the past and will be able to offer some much needed advice.😀
       
      Kind Regards
      Paul.
       
       
    • By jcj380
      Wondering what a realistic load capy. is for a Vixen APZ.  My biggest scope is an ST120 refractor that weighs about 5.5 kg with 8x50 finder and eyepiece.  I'm thinking of upgrading to a Crayford focuser which I believe will add another half kilo or so.
      I currently have a Twilight 1 which seems maxed out with the 120 and a SkyWatcher AZ5 which handles it a bit better, but it's also close to max load, I think.
      I have a Manfrotto 475B and a stock TW1 tripod.  I'd prefer not to use a counterweight, but if it's a necessity, so be it.
      Thanks!
       
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.