Jump to content

Stargazers Lounge Uses Cookies

Like most websites, SGL uses cookies in order to deliver a secure, personalised service, to provide social media functions and to analyse our traffic. Continued use of SGL indicates your acceptance of our cookie policy.

sgl_imaging_challenge_celestial_motion.thumb.jpg.a9e9349c45f96ed7928eb32f1baf76ed.jpg

Jkulin

SOLD******Skywatcher HEQ5 Pro with Rowan Belt Mod and Hypertuned******

Recommended Posts

I bought this last year from a member on here and it has been an excellent mount, however I have now upgraded to an AZ HEQ6 GT.

It has the odd marks of a used Mount, and mechanically it has just returned from being Hypertuned at DarkFrames in Portsmouth. Please see the attached Certificate.

In January a Rowan Belt Drive Modification was fitted improving tracking and operation tremendously.

In all on top of the original purchase price of £450 I have spent £112 on the Rowan Modification and £289 on the Hypertuning, totalling £851 plus the Pier Extension that took the whole lot over the £950, so I feel that I am being fair asking £725 ovno.Reduced to £695 ovno

For the price I will also include the Pier Extension that helped my old back tremendously, this cost over £70 as well.

The mount also has the much improved upgraded alt bolt modification.

It also comes with two weights, cameras and scopes not included.

There is a Syncscan Hand controller that comes with it which I have never used as I prefer to use the Ascom software with HEQ Mod as it is so much more controllable, I'll also include a 12v power lead.

Collection preferable but will post at cost (I guess at £30 odd). I'm prepared to travel up to 50 miles to meet up anything further would be at fuel cost.

You won't find a more sorted HEQ5 Pro for this price anywhere.

Please PM me or send em an email to johnkulin AT outlook dot com or call me on 07976603113

Many Thanks.

Dark Frames Certificate sml.jpg

HEQ5Pro_1.jpg

HEQ5Pro_2.jpg

HEQ5Pro_3.jpg

HEQ5Pro_4.jpg

HEQ5Pro_5.jpg

HEQ5Pro_6.jpg

HEQ5Pro_7.jpg

HEQ5Pro_8.jpg

Edited by Jkulin

Share this post


Link to post
Share on other sites

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By jadcx
      Skywatcher 80 ED DS-Pro outfit including matched flattener and motor focus £550
      This kit gives you a great introduction to astronomy and imaging, which is why it's so popular.  You can see details over at FLO but there is:
      80 ED Ds-Pro OTA (Objective Lens Diameter: 80mm, Telescope Focal Length: 600mm,  f/7.5)
      SW Eyepiece (2"): 28mm
      2”/50.8mm Di-Electric Star Diagonal
      9x50 Finderscope
      Dual-Speed 11:1 2” Crayford Focuser (Backlash-Free)
      Supplied with Tube Rings & Mounting Plate - please note there is a longer black vixen type dovetail fitted, not the fancy new green short one you will see on the FLO site
      SW motor focus and fitting kit - I've never used this, hence it's not fitted (more details over on FLO)
      Dedicated SW 0.85x reducer/flattener (see FLO for more details)
      Aluminium Carrying / Shipping Case
       
      The RRP is over £720, so grab a bargain while you can.
      Collection from Nottingham, or DHL for £20 (within UK)



    • By GiovanniF
      Hi to everyone, I used to do some astrophotography in the past with a Celestron AVX and DSLR but after few month had to give up for several reasons, including light pollution (I'm living in zone 3 east London), and also working shifts. Now I want to start again, and this time more serious. I've been searching around for a couple of months to choose all the gear and I'm quite happy with the list so far although it's a bit over the price I planned at first.
       I will get an William optics Z73 with his 50mm guide scope, a flattener/reducer 0.8, light pollution filter IDAS D2 and as camera I will use a Canon 600D modded and I will buy a ZWO 183MC Pro, after so much research, I'm very happy with the scale and framing I will get with this combo, but I'm starting to get confused with the mount.
      My first idea was to go for an HEQ5 Pro, as my previous experience with the AVX has been awful, then I realized that the FLO, sells that mount with belt modification and also some cleaning and tuning if required, I heard that it's a big improvement over the stock one and the price it's ok, but another important factor for me it's portability. Unfortunately, my garden doesn't allow me to do much so I will need to carry around on trolley, for a km walk, I'm a strong person and been doing plenty of time with the AVX, so my confusion came recently when the iOptron mounts entered my radar. I start comparing the heq5 pro with belt, with the iOptron cem25EC and the CEM40 without encoders, and I'm so unsure of which to buy, the cem25 seem to be the equivalent of heq5 at least speaking of payload, but in some threads I read people saying it's a bit fragile so kind of remove it from the equation although the weight it's interesting for my situation, then the cem40, seem to be quite similar on weight to the heq5 but with higher payload and that's interesting too as I will buy a C11 at some point.
      Now it will all come down to the accuracy of tracking I guess, how the heq5 and cem40 would compare on tracking and guiding? If the cem40 it's better, I would probably go with that since it holds more and would last longer as I don't plan to get anything bigger than a C11, but if the skywatcher it's better, I could decide to go for that, and when I move to a place with better garden then get a second mount with higher payload.
      Apologise for the long post and my english.
      Kind Regards,
      Giovanni. 
    • By JamesAstro2002
      Hi people,
      So I've been a bit of a fool and managed to drop my entire HEQ5 Pro mount head on my foot (Ouch). I was carrying it upstairs 'attached' to the tripod so I could make some adjustments to the DEC axis since there was a slight amount of play. So I set the tripod down and bam, the head rolled off and landed right on my foot. Silly me didn't realise the head screw wasn't done up all the way!
      So I gave it a test to make sure it was okay, got the hand controller out and moved it in both RA and DEC and it seemed fine.
      Then I decided to proceed with what I was going to do in the first place, adjust the worm gear engagement for DEC since there was a bit of play. After following astro baby's guide, I can hear this awful clicking sound when rotating the DEC axis a certain direction. I've attached a video below to show what I mean:

      HEQ5 Video.mp4 Any help on this would be greatly appreciated, I really hope I haven't messed it up too bad.
      Cheers,
      James.
    • By Andy Cole
      Hi all
      I'm a newbie here but not totally new to astronomy. I've had a telescope since I was a teenager (over 30 years!) and only ever had 1 telescope - a Tasco 40x40mm reflector. I expect members my age are familiar with it - thin and white with a thin metal tripod and a push and pull focuser.  It's still functional at more than 30 years old although the thread on the eyepiece is worn so the eyepiece falls off regularly! I've only ever used it to look at the moon, Jupiter and Saturn and that's always been good enough for me.  Now I have been thinking of getting a new scope. I have a very limited budget and so I am wondering whether I will get any significant improvements on what I can see.
      My earliest memories of the Tasco from childhood were that I could see the rings of Saturn as a line across the circle of the planet.  Having rekindled my interest in the last few years, I have started to use it again, and nowadays, when Saturn is visible, I can clearly see the rings 'as a ring' and the gap between the planet and the rings, which I don't remember seeing as a kid. 
      Vieing Jupiter I can usually see about 4 moons.
      I've heard that the Skywatcher Heritage 130P Dobsonian is a good 'budget' telescope, and great for casual use, which is what appeals to me most.  I don't want a telescope with complicated setup or one that takes up a lot of space.  TheSkywatcher seems to fit the bill, and it also fits my very limited budget.
      What I am most interested to find out is whill I get an improved view of the things I have already experienced?  I have read some reviews that describe what you can see with this scope and it sounds like it's pretty much what I can already see. And it's maximum 65x magnification doesn't seem like much better than the Tasco's 40x. But will the wider aperture make a bigger difference than the magnification?
      I'm also interested to know if I could use this scope for basic astrophotography - I have numerous cameras - phone cameras, compacts and DSLR's (photohraphy is my main hobby).  I'm not talking about hour long exposures of dark sky objects, just what can be seen easily through this scope.
      I'd love to know what people's opinions are, especially if you own or have used this scope.  I'm also interested to hear recommendations for other scopes, but please remember I have limited budget and space.  I know that an 8" or more is better and I would love one but they are just too expensive and too large for me.
      Cheers
      Andy
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.