Jump to content

Stargazers Lounge Uses Cookies

Like most websites, SGL uses cookies in order to deliver a secure, personalised service, to provide social media functions and to analyse our traffic. Continued use of SGL indicates your acceptance of our cookie policy.

sgl_imaging_challenge_banner_lunar_landings.thumb.jpg.b50378d0845690d8a03305a49923eb40.jpg

pilkinn

iOptron Sky Tracker (original version) - SOLD

Recommended Posts

This is the original iOptron Sky Tracker. Comes with the polarscope, case and manual.

In excellent condition.

Please note this is NOT the v2 version which has the azimuth adjustment - I used a panoramic head to adjust the azimuth. Although this model has been superseded by the v2 and now the pro versions it still tracks extremely well provided you get it polar aligned (just the same can be said for the newer models).

However as this is the older model I'm selling it at for just £95 including postage within the UK

Payment via paypal (sorry, you pay the fee or send as gift) or bank transfer.

 

 

 

 

ioptrontracker-1.jpg

ioptrontracker-2.jpg

ioptrontracker-3.jpg

ioptrontracker-4.jpg

Edited by pilkinn

Share this post


Link to post
Share on other sites

Hi, PM'd you

Lee

Edited by Magnum

Share this post


Link to post
Share on other sites

Thanks for your interest this is now sale pending.

Share this post


Link to post
Share on other sites

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Michael Hogan
      I have decided to sell my Cem-120 mount as i got a second hand AP 1100 GTO from my friend who got a new AP 1600 with encoders
      its just under a year old bought from Altair Astro so still under two year warranty is in mint cont i couldn't miss the opportunity to get
      AP 1100 GTO and let it go still waiting for pier plate for mount.
      So theirs no point in keeping two large mounts after i got my dream final mount buyer will pay shipping price is 2350 pounds.
      Altair Astro price without Ipolar Camera is 3250 pounds without Ipolar Camera which is 200 pounds total 3450 pounds
       

    • By Space Oddities
      Hi everyone,
      I decided to sell my iOptron iPolar, that is currently mounted on my SkyGuider Pro. I only used it a couple times so it's like new. Since I'm now using another mount, and will probably sell my SkyGuider eventually, I no longer need the iPolar.
      Please note that it isn't compatible with other mounts, mainly because the USB slot is on the back of the camera, not on its side.
      Price is £150, including shipping from Munich, Germany. Payment via Paypal or bank transfer.
      Please let me know if you have any question or if you need pictures!
      Thanks!  
    • By AstroRuz
      Hey all, 
      I'm considering and tempted by an iOptron CEM25P.
      Just wondering if there's any owners (current or former - for any reason) who can share their experiences with this? I intend on buying it new, so a substantial wedge to drop.
      Many thanks
    • By Photosbykev
      The postman was kind to me today and dropped off a William Optics Zenithstar 61 and Flat61A flattener and the gods smiled on me with clear skies for 30 minutes. It would be a shame not to christen the new toys
      I only managed 10 lights so I didn't even consider darks or flats. The 10 lights from the Canon 5D MkIV, shot at iso 1600 x 60 seconds, were stacked and aligned in PS, median filtered for some noise reduction and then a few layer/curves tweaks to pull out some basic detail so I could look at the star profiles and and any vignetting.
      Overall impression is extremely good build quality and the focusing through the mask is ok on very bright stars but quite a challenge on lesser star magnitudes. Very little vignetting through the imaging train so the image circle cover the full frame sensor and it will be simple to either remove the gradients in PS or use flats and sharp stars corner to corner with no obvious colour aberrations.
      I do need to check where the weird smudges are in the imaging train because they weren't on the camera sensor yesterday, hopefully I'll find them pretty quickly because they are nasty!
      Screenshots are also included of APT focusing, Stellarium for the imaging area after plate solving in APT and then PHD2 for the guiding with the ZWO ASI120mm-mini camera on a ZWO 30mm f/4 scope (I've no idea if the guiding is good or bad but the polar alignment was achieved with the iPolar camera in the SkyGuider Pro mount
      I think at some point I'll add an 2" IDAS D2 filter into the imaging train and see if I can counter some local light pollution we have around here.
       






    • By aramitsharma
      I had bought this in the hope that i will do astro trips more often. Hasn't happened and i use my avx at home. So this is not finding much use. 
      An extremely portable setup, the mount with weight and tripod leg spreader fits in a shoe box. The stock nuts have been replaced by winged nuts for easy grip in the dark.
      One of the tripod's legs suffered a slight damage, but I've taped it well and does not affect its performance. 
      I will include the computer connecting cable as well as polemaster adapter.
      You can read its review here:
      http://www.altairastro.com/public/ioptron/Skyatnight_95_april2013_ioptron_smartEQPRO-review.pdf
      Will prefer pickup from London as the postage may be tricky due to the tripod
       
      £250.00


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.