m27 using Astrotoaster and unmod canon 100d

[stash_old]

Ok not the normal VA/EAA image but Astrotoaster does show this image(this is the saved screen image!)  in real time (nearly - after just 2 images!). 

https://drive.google.com/open?id=0B9aHac2P5RgVNWdVenFPZ2lTMzA

60sec X 20 ISO 800 unmod DSLR no guiding 

[Bill S]

Good picture. Lots of detail and good coloir.

One question.

Is this one the result of stacking 2 images or 20 images? Also, I am wondering what mount and scope are you using to get this with no guiding and 60 second subs?

[stash_old]

10 hours ago, Bill S said:

Good picture. Lots of detail and good coloir.

One question.

Is this one the result of stacking 2 images or 20 images? Also, I am wondering what mount and scope are you using to get this with no guiding and 60 second subs?

The actual picture loaded here was the saved TIF image from Astrotoaster after it had stacked 20 images BUT you still got the same image(just about) shown in "real time" on screen ,using saved colour adj settings,after 2 images were stacked. M27 is the second brightest Nebula !

Mount was AZEQ6GT with no guiding but using EQMOD 3 point alignment and no darks,no bias etc just Astrotoaster stacking monitored folder. 

Scope - Bresser 127S/635

[stash_old]

Just to show I have restacked astrotoaster using just 2 images to give you an idea what I can see after 2 images have been stacked - hope that answers your question Bill

 

https://drive.google.com/file/d/0B9aHac2P5RgVU2dfOFlfOWFXWkE/view?usp=sharing
 

Edited May 27, 2017 by stash_old

[Bill S]

Thanks stash_old that answers my question. As you say impressive after stacking just two images.